Triple-Guard® Marine Grease Triple-Guard®, 8 oz Tube 0508298
- This is an OEM part manufactured by Evinrude & Johnson, OMC
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Description
Triple-Guard® is a tough grease that stays in place and is unaffected by vibration, saltwater, or cold temperatures. • Reformulated -higher water resistance and improved adhesion to metal • Ideal for owner engine maintenance • Won't swell seals, packing or O-rings • Compatible with other greases • Totally waterproof to prevent water wash-off • Not for use in wheel bearings or universal joints • Used on spark plug wire leads
This product is mentioned in 35 documents:
Product Questions
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
85 Product Reviews
- Repair Difficulty
- Medium
- Repair Time
- More than 4 hours
Problem fixed: Powerhead replacement
Still ongoing. replaced powerhead. I am upgrading parts as needed during reassembly. Your parts selection and website interaction are top shelf.
Evinrude 25hp
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: C0mplete lower unit overhaul
Learning experience , first time On an outboard
Evinrude ETEC 150
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: None - General Maintenance
The water pump hadn't been replaced in at least five years under previous ownership, so it was time to replace it as a precaution. Everything went well and the instruction were self explanatory. The only trouble I had was trying to locate the 3M 847 Adhesive...it was nonexistent. I spoke to a boat shop that said the 3M yellow gasket adhesive will do the trick as well as Permatex.
Evinrude Etec 150
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Intermittent cranking problem
Basically, the original solenoid would still ”click” at start, but there was enough other resource demands (voltage drop) that combined with some resistance to drop the volts below 10v and the motor would not start. But once the fuel pump stopped priming and the system check completed, there would be enough juice to fire right up. Removing the original solenoid from the motor, except the “trigger switch” we determined there was 112 ohms of resistance. Thankfully, I had suspected a possible solenoid and purchased a new one earlier in the week. So we hooked it up to the trigger switch, turned to start and got less than 60 ohms of resistance. Half the resistance of the original solenoid that was still able to function when warm. Replaced the solenoid and copper washer and all is well. Cranks right away without waiting for the system check.
Evinrude 115 etc
98 Johnson 90hp
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: VRO oil pump assembly leaking. bad idle, low oil
Removed offending part while carefully not dropping the torx head screws. Installed new oil pump and connections. Worked great, no alarm and the idle was better. Now for the carbs.
Mercury Optimax 150 2006 model
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: Engine low water pressure and temperature high alarms
Rebuild water pump. It is medium difficulty for a single person and I could do it now in less than 2 hours. Learning where all bolts are hiding and having help to place lower unit back in place would make this an easy job instead of medium. Things I did right was ensure motor is in gear before removing lower unit, grease parts and shaft splines before replacing and built a quick u shaped plywood top on some legs to hold unit while rebuilding water pump.
Evinrude E8RCEC
Evinrude 135 hp
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: Engine overheating over 3000 rpm
Replaced the water bypass valve
Johnson 150 fast strike
- Repair Difficulty
- Medium
- Repair Time
- 2 to 4 hours
85 Evanrude 90hp
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
suzuki 2009 50 CV
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
Evinrude 15HP
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: General maintenance
Needed materials to service my 1993 Evinrude 15HP outboard motor. Items easily located online and arrived quickly.
48hp spl
E50DPLSDA
Evinrude 88
Johnson 40 hp
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: running rough
Engine was running rough and hard to start. Replaced fuel filter, lower unit grease and ran a can of engine tuner through the engine. Now it starts right up and runs great.
- Repair Difficulty
- Medium
- Repair Time
- More than 4 hours
Mercury 150HP
- Repair Difficulty
- Medium
- Repair Time
- 30 to 60 mins
Problem fixed: overheating and alarm buzzer coming on
Water pump impeller and gasket replacement as the overheating alarm was going off and no water was coming out of the small hole on the engine indicating no water was being pumped.
Johnson 150
- Repair Difficulty
- Easy
- Repair Time
- 1 to 2 hours
Problem fixed: Replace water pump
I've never worked on an outboard before but didn't want to pay for a repair I felt I could do myself. It was quite easy and I had no issues.
Evinrude E-tec 90
- Repair Difficulty
- Medium
- Repair Time
- 30 to 60 mins
Problem fixed: Ran rough below 1200rpm
Replaced plugs and indexed them. Previously we had hired a mechanic to fix the problem, but he did not index the plugs. We had never heard of "indexing" plugs, but my wife learned about it while researching the symptoms on Google
johnson 150 Hp
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: bendex on starter motor would not engage when hot
first replaced upper bendex bushing, no success. replaced lower bushing and bendex unit. problem resolved
Vintage 1972 Puch Austrian 27" bicycle
- Repair Difficulty
- Professional
- Repair Time
- More than 4 hours
Problem fixed: Stored to over 35 years. Extensive parts restoration and replacement
Had to completely disassemble bicycle, restore all reusable parts, and do extensive search for non repairable pieces. Took over one month to locate exact original replacement parts and 60 hrs labor to bring back to new condition. The Evinrude/Johnson outboard motor grease was recommended by a number of online bicycle repair experts for wheel bearings and fork head bearings to provide good water resistance and quality lubrication.
1993 evinrude 15 hp
'93 evinrude 90HP V4
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
Evinrude 140 ocean pro
Customers Also purchased
Supersession Chain
Name | SKU | Superceding SKU |
---|---|---|
Triple Guard Grease 8 Oz VIEWING THIS PRODUCT | 0508298 | CURRENT |
Obsolete BRP Part | 0174981 | 0508298 |
Obsolete BRP Part | 0173653 | 0174981 |
Obsolete BRP Part | 0172546 | 0173653 |
Obsolete BRP Part | 0377783 | 0173653 |