Motor Cover Seal 0329548
- Guaranteed fitment for 21 different models
- This is an OEM part manufactured by Evinrude & Johnson, OMC
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Description
9 Product Questions
James Taylor
Answer:
Yes, it will fit.
Ricky Nichols
Answer:
Hello, Please be advised without a specific model/serial number it is difficult to advise exactly what will fit. However through more research, I was able to verify that the listed part https://www.crowleymarine.com/parts/13951.cfm does fit numerous 1990 115 Evinrude models. I hope that helps. Thank you!
Ross
Answer:
Hi Ross, Just going off the fitting grid, it appears it does not. I recommend going in on iboats.com to get a second opinion. Kindly, Diego Mori Crowley Marine Support Specialist
Nick
Answer:
Yes, part number 0329548 will be the correct one needed for your model number
Reggie Hays
Answer:
Hello, Unfortunately our dealer program only goes back to 1968, so we would not really have a way of knowing if that will work or not. I would suggest browsing the advice/technical forums on iboats.com Thank you
Brian Elliott
Answer:
Yes, part number 0329548 would be the correct one needed.
Angelo
Answer:
Yes, the correct part number needed is 0329548
kinshella
Answer:
That item is black in color. Do you have your engine model number, and we can look further into this for you.
Mitch Crumley
Answer:
This seal does not require staples. You can use 3M 847 to hold it in place if necessary.
47 Product Reviews
Johnson 90 v4
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
1982 & 70ty Evinrude
110 Johnson
1978 evinrude 140hp
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Replaced newer 70hp with older 140hp
Thanks to the adapter harness from Crowley marine, it was almost plug-and-play. Great product, would definitely buy again, was able to use newer controls with older engine without splicing multiple wires.
1983 Johnson outboard 115 hp
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: engine cover rubber gasket was original and hard.
Removed the old original hard rubber engine cover gasket by removing the staples and saving. Installed the NEW rubber drilling holes were the original staples went through the fiberglass cover and reinstalled the original staples as were before. Great Look with the New gasket.
Evinrude 115
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Old seal was old.
No directions. Original seal jad staples. I just washed and roughed up the surface and use an adhesive [something 6000). Worked well.
Evinrude 1978 85 hp
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
Problem fixed: engine cover seal was deteriorating
removed engine cover, removed all staples from old seal used spray adhesive to affix new seal then drilled holes to replace all the staples.
Johnson 85 hp
1983 Evinrude 115
- Repair Difficulty
- Easy
- Repair Time
- 2 to 4 hours
Problem fixed: looked like a 1983 motor...
Crowley was helpful in identifying the correct paint to match my motor and also in recommending a gasket for the Hood. Everyone thinks I have bought a new motor.
Johnson 90 hp
Evinrude 115hp
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
Problem fixed: Old worn out engine cover gasket
I repainted my engine cover and when I was finished I come out so nice I had to replace the old gasket. First had to remove the staples but don’t throw them away you can reuse them. Then I put the new gasket on and replaced the staples. It was a little time consuming but well worth it. The cover looks great
115 evinrude
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Seal gone
Looked for a cowl seal for my 82 motor shops here blew it off. Found on my own here.
Evenrode
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Had a worn out gasket
Replaced the bad gasket on engine hood . New gasket was a perfect fit
1981 Evinrude 90 HP 2 stroke
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
1978 Johnson 115
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Broken Throttle Cable
The replacement was easy. Removed the old one and slid the new one in place. Hooked up the cable to the remote and the motor and done.
Evinrude 85 hp
Customers Also purchased
Supersession Chain
Name | SKU | Superceding SKU |
---|---|---|
Motor Cover Seal VIEWING THIS PRODUCT | 0329548 | CURRENT |
Engine Cover Seal | 0210743 | 0329548 |
Shift Bracket Seal | 0766473 | 0329548 |
Engine Cover Seal | 0325435 | 0329548 |
Motor Cover Seal | 0319234 | 0329548 |
Motor Cover Seal (85,100,115) | 0208076 | 0329548 |
Engine Cover Seal | 0209504 | 0329548 |
Engine Cover Seal | 0910916 | 0319234 |