Washer 12-822146
- This is an OEM part manufactured by Mercury Marine
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Description
Product Questions
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
19 Product Reviews
Mercury 9.9
- Repair Difficulty
- Medium
- Repair Time
- 2 to 4 hours
Problem fixed: Loose tiller handle
Replaced tiller handle bushings and washers. Replaced tiller handle throttle cables
Mariner / Mercury
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: Broken Tiller Arm
Unbolted holding bracket inside engine casting to remove arm disconnected throttle / gear selector inverted new Tiller Arm and realized bushings needed to be replaced. Ordered new bushings and didn’t have time to install.
Mercury
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: Stalling
Noticed a broken bolt at the end of the tiller caused a stainless steel plate to bend and pinching the starting and kill switch
mercury 8hp 2 stroke
- Repair Difficulty
- Medium
- Repair Time
- 30 to 60 mins
Problem fixed: broken/worn bushing on tiller handle
Inner bushing broken, handle pivot loose. Must disconnect shift cables, and shutoff switch to install new bushing. engine should hung on boat or engine stand for easier installation.
25 hp yamaha tiller
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: Hard start and poor to no idle
Got this engine home and expected dirty carbs. Closer inspection also revealed the idle mixture screws on both carbs were snapped off by previous heavy handed mechanic. Upon disassemble i found a missing gasket as well as a small amount of dirt in the carbs. Cleaned and blew everything out, replaced 4 tired and or missing gaskets, the new idle screws and tension springs and serviced the lower unit and is good as new. All for $60 worth the parts and less than 2 hours if my time.
Mercury 9.9 kicker
- Repair Difficulty
- Medium
- Repair Time
- Less than 30 mins
Problem fixed: The plastic bushing on the tiller broke.
Found the parts on the schematic on-line and ordered the parts. Crowley had everything I needed and shipped the fast. Ready to fish before the weekend!
