Bushing 23-820430
- This is an OEM part manufactured by Mercury Marine
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Description
Product Questions
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
9 Product Reviews
Mercury 90 hp
- Repair Difficulty
- Hard
- Repair Time
- 2 to 4 hours
Problem fixed: Replace seals and sleeves in jet pump
Pulled the nozzle then the pump housing not so bad with the correct tools . The hard part was trying to find a shop to pull the sleeves once that was done and sleeves replaced putting in the seals were pretty simple . Once that was done I made sure everything was well lubed to slide back on . Sliding the housing back on was a lot of wiggling as to not damage anything. Then just bolt back on the pump and nozzle and hit the water . Thanks Crowley marine .
Mercury Sport Jet 120
- Repair Difficulty
- Hard
- Repair Time
- More than 4 hours
Problem fixed: Checking for water before winter storage
While replacing oil in the jet drive unit i found low oil and lots of water in the stater bearing area. I needed to pull the 2 seals and the 2 bushings (needed an ID bearing puller). I made a pilot shaft to install it bushings and one the set the 2 seals.
Jet Boat Sea Ray 120hp
- Repair Difficulty
- Easy
- Repair Time
- More than 4 hours
Problem fixed: Drive unit not working
Disassembled drive and repaired.