Primer Bracket 12803
- This is an OEM part manufactured by Mercury Marine
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Description
1 Product Questions
john edmonson
Answer:
This fits dozens of models from 6 to 25 hp. You would want to look up the parts catalogs for your specific model to check a specific fit.
41 Product Reviews
Mercury 9.9 2str.
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Choke lever disconnected
Remove choke lever by pulling clip. Remove 2 screws holding primer bracket, swap in new one. Reinstall choke lever. Voilà.
Mercury 25 HP
- Repair Difficulty
- Medium
- Repair Time
- Less than 30 mins
Problem fixed: Broken Fuel Primer Bracket
Removal of the broken bracket from the Carburettor, disassemble old bracket, assemble new bracket, reinstall and test with running motor.
Mercury 15 hp
Mercury 25hp Sea pro
mercury 25hp
- Repair Difficulty
- Medium
- Repair Time
- More than 4 hours
Problem fixed: brother tried to fixed, than wouldn't go in gear.
pull starter, pulled pin. pulled lower uint. Brother put impeller in, I replaced one seal, and washer, put it back. than fixed carburetor primmer bracket, and new than new thermostat.
25 MERCURY/1988
Merc 25
Mercury 9.9
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
Problem fixed: Broken flange
Spare part
Mercury 25 hp
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Choke fast idle
Removed carb installed choke thru motor cover installed carb and choke hook up linkage
Mariner 6 HP
- Repair Difficulty
- Medium
- Repair Time
- 30 to 60 mins
Problem fixed: Carb rebuild, bracket replacement, change impeller.
Only difficulity was the bracket in front of the carb. Will only fit if installed in correct order, determined by trial and error.