SPK PLUG QC10WEP 5011240
- Guaranteed fitment for 29 different models
- This is an OEM part manufactured by Evinrude & Johnson, OMC
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Questions
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
20 Product Reviews
Etech 30 hp
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: No Oil / overheated
-Water pump complete kit replaced. -Found air bubbles inside the oil lines from the oil tank to the oil pump. -Did the winterization twice and still some air in the lines. -Found the oil tank cap to tighten and the tank slightly collapsed. Technician had troubleshoot the engine without getting a conclusion. Still working due to the light of the EMM getting on (NO OIL / OVERHEATED) everytime we perform a test.
E-TEC 250
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: TIME TO CHANGE PLUGS
I TOOK OUT THE OLD PLUGS. SET THE GAP ON THE NEW PLUGS, INDEX MARKED THE NEW PLUGS AND PUT THEM IN. TOOK OUT THE OLD FUEL/WATER SEPARATOR AND INSTALLED THE REPLACEMENT FUEL/WATER SEPARATOR. DID A WATER HOSE RUN-UP AND CALLED IT A DONE JOB. NOT A BIG DEAL......
E75DSLABB
Evinrude E75dslafg
Evinrude Etec 75
Evinrud
Evinrude 150 & 15
- Repair Difficulty
- Hard
- Repair Time
- 2 to 4 hours
Problem fixed: 15 hp was over heating
Needed a new impeller and water pump
Evinrude 60 hp
Customers Also purchased
Supersession Chain
Name | SKU | Superceding SKU |
---|---|---|
SPK PLUG QC10WEP VIEWING THIS PRODUCT | 5011240 | CURRENT |
Spark Plug QC10WEP | 5007419 | 5011240 |
Spark Plug - QC10PEPB | 5006308 | 5011240 |
SPARK PLUG - QC10WEP) | 5007120 | 5007419 |
Obsolete BRP Part | 5006213 | 5006308 |