Fuel Filter Kit In-Line Fuel Filter, 12 to 15 Micron 5007335
- Guaranteed fitment for 6 different models
- This is an OEM part manufactured by Evinrude & Johnson, OMC
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Description
Note: Not for V6 90° Evinrude® E-TEC® Engines.
Parts included in this kit
Please note: Some of the included items may not be available for purchase separately and won't be listed here.
Name | SKU | Price | Brand |
---|---|---|---|
Clamps -Oetiker® Ear | 0346150 | Evinrude & Johnson, OMC | |
Tie Strap | 0907833 | Evinrude & Johnson, OMC |
Product Questions
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
87 Product Reviews
Evinrude e-tec 115
50 hp Etec
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: bog down when accelerating..
change of oem engine mounted fuel filter which was original 8yr old paper filter DUH.. customer did not know there was one there
Evenrude
Johnson E-tec 90
2007 evinrude 90 hp etech
Evinrude E75dslafg
Johnson e 40
tech 90
Etech 75hp
Evinrude ETEC 99
Evinrude Etec 150 Saltwater edition
- Repair Difficulty
- Medium
- Repair Time
- More than 4 hours
Problem fixed: 300 hour service
I use my engine in saltwater so I did the entire recommended service list, not just the 300 hour. It runs like a top. I will be needing a new lower unit in the next year or two due to saltwater corrosion. I've looked them up and they're readily available brand new. Pretty good for a 14 year old engine!
E-Tech 75 hp
- Repair Difficulty
- Hard
- Repair Time
- More than 4 hours
Problem fixed: Noise from top of engine
-changed upper crankshaft bearing and seal + both thermostats.
evenrude 90 ETEC
Evinrude Etec75
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Engine not accelerating past 1800 rpm and shaking wildly
1) checked service manual and on the internet to find the issue on hand of the symptoms 2) took out the faulty switch - I tied a thin wire onto the lead of the faulty switch before I took it out and left the wire there as help to pull the new switch cable back in through the same route 3) tied the end of the new lead onto the wire and pulled it carefully through to the plug-in connector 4) plugged the new cable in 5) screwed on the switch on its spot 6) tried it on the water - motor runs again perfectly 😊
2007 115hp Evinrude Etec
- Repair Difficulty
- Easy
- Repair Time
- 1 to 2 hours
Problem fixed: motor wouldn't start - had no fuel
When changing the fuel pump for the updated version, be sure to understand that the gas lines were reversed. The line from the lower fuel pump goes into the bottom gas line closest to you and the fuel return line from the injectors goes to the back one - this is reverse from the old style fuel pump.
Evinrude etec75
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
Problem fixed: Tilt trim switch on the engine replaced.
.
Etec 150 hp
2007 Evinrude Outboards 175 [ E175DPXSUF ]
Evinrud
2007 evenrude 150
- Repair Difficulty
- Easy
- Repair Time
- 1 to 2 hours
Problem fixed: o ring on shifter bound up
could not get the parts because everything was closed because of the Wuhan virus Crowley came up with the parts at a resinable price
Evinrude E-TEC, 90 hp
- Repair Difficulty
- Medium
- Repair Time
- 2 to 4 hours
Problem fixed: Routine Maintenance
Basically performed the 300/3yr service using the tech tip pages/parts breakdowns from the web site and other sources. Project went well. Typical job where the first time takes 4 hours and if I did it again it would be an hour tops. Saved myself a bunch of money for tackle and gas!
40 Evenrude E-Tec
2005 Evinrude ETEC 90
- Repair Difficulty
- Hard
- Repair Time
- 2 to 4 hours
Problem fixed: Water pump seals and internal anoid
I needed a new water pump and anoid on lower shaft carrier unit and seals on carrier as well as seals under water pump i ordered parts as usual delivery on time. As i was checking my manual i realized i needed an exhaust seal that i failed to order so called Crowley they had part i opted for three day shipping and got part on time to start repair . these are good people and have had parts when i needed them i will order from them again thank you Crowley Marine Steve B.
75 Evinrude
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: Fuel pump leaking and gas lines needed replaced from tank to fuel pump as well as primer bulb
I dropped off the boat then picked it back up the next day as it was fixed. I then paid the bill which was $286.20
Etec 115
Evrinude 40 Etec
Evinrude etec 90hp
- Repair Difficulty
- Medium
- Repair Time
- 2 to 4 hours
115 evinrude e tec
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
Problem fixed: Motor running hot
Installed new water pump. No more problems !
60 hp etec
etec 115
Customers Also purchased
Supersession Chain
Name | SKU | Superceding SKU |
---|---|---|
Fuel Filter Kit VIEWING THIS PRODUCT | 5007335 | CURRENT |
FUEL FILTER KIT | 0768720 | 5007335 |
Obsolete BRP Part | 5007326 | 5007335 |
Fuel Filter | 5005266 | 5007326 |