Impeller & CAM Assembly 5001593
- Guaranteed fitment for 87 different models
- This is an OEM part manufactured by Evinrude & Johnson, OMC
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Description
Parts included in this kit
Please note: Some of the included items may not be available for purchase separately and won't be listed here.
Name | SKU | Brand |
---|---|---|
Impeller Key | 0331107 | Evinrude & Johnson, OMC |
Spacer to Impeller O-Ring (5" Longer Model) | 0302035 | Evinrude & Johnson, OMC |
This product is mentioned in 1 document:
Product Questions
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
81 Product Reviews
Johnson 50 hp
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
Problem fixed: Alarm going off constantly
Replaced the oil sending unit and it took care of the alarm.
Johnson
- Repair Difficulty
- Medium
- Repair Time
- More than 4 hours
Evinrude 120
E-tech 90
Evinrude 235
Evinrude 150
Johnson 100 hp V4
- Repair Difficulty
- Medium
- Repair Time
- 30 to 60 mins
Problem fixed: Water in lower unit.
Did the job for a friend. Dropped lower unit, replaced the water pump impeller as spring tune up. Removed prop. Removed the carrier from lower unit by removing 4 bolts that hold it. Had to use a puller to get carrier out. Seal puller to remove seals. Using a socket, drive the new seals into place, being careful not to damage seals.
Evinrude 225 ETEC HI
Johnson 90, 115 hp
1991 Johnson 150
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: I was getting a High Temp Alarm when I would push it a bit. This is after I had changed the Water Pump and was getting great pressured flow. So I decided to change out the temperatures switches (2) and the thermostats (2).
Unable to find time for repairs at this time. So, I'm not sure if I have made to correct diagnosis.
1982 Johnson 175
evinrude 200 hp ficht ram
- Repair Difficulty
- Easy
- Repair Time
- 2 to 4 hours
Evinrud
Johnson 5.5
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Cooling
Changed thermostat and impeller
Evinrude
90 evinrude
Johnson 150 HP 1993
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: Shift lever seals and impeller needed replacement
Best tip I received from another site was to use a ratchet strop to hold bottom leg as I eased it off the engine and also when I had to reposition it with exhaust, water drive shaft and shift.
1995 johnson 90hp v4
- Repair Difficulty
- lProfessional
- Repair Time
- More than 4 hours
J90PLSTC
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: LOWER GEAR WOULD NOT SHIFT, REPLACED COVER AND WATER PUMP WHILE FOOT WAS REMOVED.
HAD TO REPLACE COVER IN LOWER FOOT CAUSING GEAR ROD TO STICK NOT ALLOWING GEAR TO CHANGE. REPLACED WATER PUMP AND LOWER MOTOR MOUNTS WHILE FOOT WAS OFF. ALL WENT WELL WHEN YOU HAVE THE RIGHT PARTS TO GET-R-DONE. THANKS CROWLEY
Johnson 90 horse power
- Repair Difficulty
- Hard
- Repair Time
- More than 4 hours
Problem fixed: Lower unit would slip when in reverse
I replaced the clutch dog in the lower unit. I watched a youtube video before I began. The video wasn't exactly the same but close enough to complete the job. I have previous experience with repair on a lower unit.
Evinrude 130 DPLES
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: slightly lower water pressure, maintenance
Replaced water pump impeller & fuel filter/seperator
Evinrude etec 75 hp
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
1984 Johnson 140hp V4
- Repair Difficulty
- Medium
- Repair Time
- 2 to 4 hours
johnson 90hp
- Repair Difficulty
- Medium
- Repair Time
- Less than 30 mins
Problem fixed: cooling system not working properly.
Disengage lower unit to access the impeller and change the two thermostats on the power head. Relatively, easy.
Evinrude 200
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Engine sat for more than ten years.
Had an old Evinrude 200 that had been sitting for a long time. Changed out the impeller and put the motor on a bass boat I picked up. It's a gas guzzling beast.
Evinrude 200 ho
Evinrude 150
jonson 90 hp
Customers Also purchased
Supersession Chain
Name | SKU | Superceding SKU |
---|---|---|
Impeller & CAM Assembly VIEWING THIS PRODUCT | 5001593 | CURRENT |
Water Pump Impeller | 0435821 | 5001593 |
Water Pump Impeller | 0777816 | 5001593 |
Obsolete BRP Part | 0397131 | 0435821 |
Impeller Assembly | 0435748 | 0435821 |
Impeller & Key Assembly | 0395864 | 0397131 |
Impeller Assembly | 0394534 | 0395864 |
Impeller Assembly | 0391538 | 0394534 |
Impeller Assembly | 0389289 | 0391538 |
Aftermarket Product Interchange
Name | SKU | Price | Brand |
---|---|---|---|
Impeller | 18-3059 | - | Sierra Marine |
Impeller | 89570 | $38.16 | GLM Marine |
Impeller | 9-45206 | $26.99 | Mallory Marine |