Vapor Separator Float Valve & Seat 0396521
- Guaranteed fitment for 50 different models
- This is an OEM part manufactured by Evinrude & Johnson, OMC
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Description
Parts included in this kit
Please note: Some of the included items may not be available for purchase separately and won't be listed here.
Name | SKU | Price | Brand |
---|---|---|---|
Float valve Spring Clip | 0336842 | Evinrude & Johnson, OMC | |
Seat to carburetor Washer | 0301996 | Evinrude & Johnson, OMC |
Product Questions
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
53 Product Reviews
model 85ESL70B
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: Carbs needed to be updated
Was tested in tank and was not starting easy, so did compression test, 100 ea cylinder, then checked electrics, changed spark plugs, tried again, no luck, took carbs off for cleaning, once torn down it needed float valves, I decided best route was rebuild, parts supplied by Crowley Marine! In process of replacing parts to get ready for install to boat.
Johnson 40 hp
9.9 Johnson 1981
- Repair Difficulty
- Medium
- Repair Time
- 30 to 60 mins
Problem fixed: Hard start poor to no idle.
Installed new spark plugs, fuel pump soft parts and a carb kit with carb cleanup and back to new now.
Johnson 90 hp
- Repair Difficulty
- Medium
- Repair Time
- 2 to 4 hours
Problem fixed: Vapor separater gaskets and needle valve.
Gaskets on vapor separater leaking air and fuel ,motor ran good till it got warm then if you shut it down and restarted it ,it would stall and run rough and would not get up to rpm.Had it to two Marinas and said it was the carbs , can't find good machanics hear by the outerbanks NC. Outboard runs great now.
9.9 evenrude
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: rich carb on outboard..
R&R CARB. INSTALL NEEDLE AN SEAT ..HAVENT RUN BUT SURE WILL RUN BETTER...
Evinrude 85hp
- Repair Difficulty
- Easy
- Repair Time
- 1 to 2 hours
Problem fixed: Stuck bowl float
Removed and disassembled carburetor and replaced needle valve and seat assembly.
Johnson stinger 75
evinrude 20hp
Evinrude worktwin 40
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Evinrude 40 hp
- Repair Difficulty
- Easy
- Repair Time
- 1 to 2 hours
Problem fixed: Would not idle on one cylinder.
Replaced ignition coils and then also did a second buy for carb parts to rebuild the two carborators.
Evinrude 4.5 1982
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Gas coming out of the carburetor
removed carburetor replaced float and valve ops check good
johnson 1973 65hp
- Repair Difficulty
- Medium
- Repair Time
- 2 to 4 hours
Problem fixed: ignition problem presenting as fuel
Rebuild n clean tripple carbs, man were they a mess
1991 150 evinrude
johnson 60hp
Customers Also purchased
Supersession Chain
Name | SKU | Superceding SKU |
---|---|---|
Vapor Separator Float Valve & Seat VIEWING THIS PRODUCT | 0396521 | CURRENT |
Float Valve & Seat Assembly | 0678882 | 0396521 |
VALVE & SEAT ASSEMBLY,FILTER | 0765555 | 0396521 |
FLOAT VALVE ASSY. | 0378895 | 0396521 |
Obsolete BRP Part | 0375798 | 0378895 |
Obsolete BRP Part | 0381463 | 0678882 |
Aftermarket Product Interchange
Name | SKU | Price | Brand |
---|---|---|---|
Needle & Seat | 18-7093 | - | Sierra Marine |
Needle & Seat | 40710 | $6.52 | GLM Marine |
Valve,Needle | 9-36801 | $5.99 | Mallory Marine |