Fill & drain Plug Drain Screw 0318544
- Guaranteed fitment for 7 different models
- This is an OEM part manufactured by Evinrude & Johnson, OMC
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Description
Parts included in this kit
Please note: Some of the included items may not be available for purchase separately and won't be listed here.
Name | SKU | Brand |
---|---|---|
Fill & Drain Screw Seal | 0311598 | Evinrude & Johnson, OMC |
1 Product Questions
Rick Friederichs
Answer:
This drain screw has a slot for a screwdriver.
88 Product Reviews
evinrude 8cv
- Repair Difficulty
- Easy
- Repair Time
- More than 4 hours
Problem fixed: n'a pas fonctionné depuis plusieurs années et à été mal entretenu
ancien moteur qui n'a pas fonctionné depuis longtemps et que je remets en état car j'aime les vielles mécaniques.
1991 Johnson Commrcial 100
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Evinrude ETEC 200 HO
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Drain plugs and seals, trailer tilt lock spring
Just took the broken lock spring out along with a broken spring retaining clip and replaced with new ones from Crowley Marine. Easy, perfect fit.
Evinrude 48
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Simple replacement of worn parts.
Removed screws. Replaced screws with new gaskets.
Johnson 115 hp
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Leaking lower unit drain plug and anode to replace
Raised motor all the way up removed drain plug and replaced.
Johnson 115 hp
Johnson 85 HP
50 hp evinrude
40hp johnson tiller
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: leaking seals and worn plugs
replaced lower unit drain and fill plugs
Evinrude
1977 85hp evinrude
06 Evinrude 150
2000 Johnson 50 HP
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Needed a replacement anode.
Before installing my new prop, I ordered a replacement anode that is installed behind the prop. Crowley had the anode & replacement screws in stock. It took less than 5 minutes to install the new anode & then install the prop.
Johnson 50 2 cycle
Evinrude 150
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: NA
Just needed to get some parts that sealed up the engine cover. Awesome parts
Johnson 85 hp v4
- Repair Difficulty
- Hard
- Repair Time
- More than 4 hours
Problem fixed: lower unit leaked oil and water took out the bearings
I enlisted the help of my friend and neighbor ( who also happens to be a mechanical genius } , who also repairs my quads etc.
Evinrude 70hsp
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: Lower unit prop seals replaced
Watched u tube video by dangar marine & removed & replaced seals
1995 johnson 90hp v4
- Repair Difficulty
- lProfessional
- Repair Time
- More than 4 hours
Evinrude 40
Evenrude 50 hp
Evinrude ETEC 40HP
Evinrude etec 75 hp
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
Johnson 150 faststrike
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
OMC 120 hp sterndrive stringer
Johnson GT 150
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
Problem fixed: Tachometer needed replacement and lower unit oil plug leaked.
Replaced Tach following included instruction. Replaced lower unit plug/screw.
Johnson 40 HP
- Repair Difficulty
- Medium
- Repair Time
- More than 4 hours
Problem fixed: Unable to shift into forward, or reverse gears
Remove lower unit/gear case assembly, remove prop' shaft assembly from case. Found that the splines on prop' shaft, and clutch dog had been damaged possible previously repair job on the cheap . Install new shaft, clutch, shift cradle, water pump, assembly, seals, and gaskets. Pressure test at 11 psi no leaks .Adjust shift rod to manufactures specs' Reinstall lower unit refill with recommended gear lubrication from bottom drain plug . Test ran motor, shifted into forward, and reverse gears engaged with no problems, Prop' rotation correct.
Johnson 90hp 2stroke
Customers Also purchased
Supersession Chain
Name | SKU | Superceding SKU |
---|---|---|
Fill & drain Plug Drain Screw VIEWING THIS PRODUCT | 0318544 | CURRENT |
Screw (M8 X 40) | 0777603 | 0318544 |
Screw (Drain & fill) | 0912624 | 0318544 |
Aftermarket Product Interchange
Name | SKU | Price | Brand |
---|---|---|---|
Magnetic Drain Screw | 18-2378 | - | Sierra Marine |
Draining Screw Set | 21731 | $7.28 | GLM Marine |
Plug, Lower Unit Drain (non-magnetic) | 9-72654 | $10.49 | Mallory Marine |