PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Setup Manual DF300 Installation Of Switch Panel[Installation Of Bcm (Boat Control Module)]

Produtos Relacionados:
Setup Manual DF300 Installation Of Switch Panel[Installation Of Bcm (Boat Control Module)]
99505-98J00-01E
Suzuki Marine

Step 1: INSTALLATION OF BCM (Boat control module)

• Install the BCM avoiding direct rays of the sun and water splash.
• Face the connector downward when installing the BCM.
• Before installing and removing the electric parts, turn the main switch OFF and remove the battery cable from the battery. When disconnecting the battery cable, remove the negative cable first and then the positive cable. When connecting the cable, connect the positive cable first and then the negative cable.

The following conditions must be observed when installing BCM.

  • Install in a dry protected area.
  • Area selected for installation must not exceed 75 °C (167 °F)
  • Anchor BCM to a flat solid surface.

(1) Install the cushion (1) to the BCM (boat control module).

(2) Install the holder R (2) and holder L (3) to the BCM and install the BCM with four (4) screws.

Step 2: BCM (Boat Control Module)

Step 3: BCM (Boat Control Module) holder L/R

Share on social:

Produtos Relacionados