PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Service Manual Evinrude E-TEC 40-60 HP Manual Starter [Cleaning And Inspection]

Produtos Relacionados:
Service Manual Evinrude E-TEC 40-60 HP Manual Starter [Cleaning And Inspection]
5007209
BRP Marine

CLEANING AND INSPECTION

Wash metal components in solvent and dry with compressed air.

Inspect the rewind spring for broken end loops and weak tension.

Examine the starter pawl for wear.

Inspect the starter components for wear. Replace as necessary.

Inspect starter rope. Replace rope if frayed. Cut new rope 96.5 in. (245 cm) in length. Fuse ends of rope to a length of 1/2 in. (12 mm).

Examine the pulley and the starter housing. Look for sharp edges and rough surfaces that could fray the starter rope. File and polish to remove.

Examine the starter and starter lockout parts. Replace any worn or damaged parts.

ASSEMBLY

Wear safety glasses while disassembling and assembling manual starters because of rewind spring tension.

Place starter spring shield into the starter housing.

  1. Shield

Using Starter Spring Winder and Installer, P/N 392093, clamp spring winder base in a vise. Insert release plate into spring winder base.

  1. Base
  2. Plate
Share on social:

Produtos Relacionados