Replacing propeller shaft oil seal

- Extract the seals with oil seal remover.
09913-50121 : Oil seal remover
- Apply Water Resistant Grease to the inner circumference of the housing.

- Using an oil seal installer, drive the two oil seals (one at a time ) into the propeller shaft bearing housing. The lipped portion of the seal must face towards the propeller.
Apply Water Resistant Grease to the seal lips.
SHIFT ROD AND SHIFT CAM

Inspect the “stepped” surfaces of the shift cam.
Replace if chipped, damaged or excessively worn.
Inspect shift rod guide. Replace if pitted, stiff or corroded. Inspect O-ring. Replace if nicked, cut or torn.
Inspect shift rod boot. Replace if cracked or damaged.
WATER PUMP AND RELATED ITEMS

Inspect impeller. Replace if vanes are cut, torn or worn.
Inspect pump case. Replace if cracked, distorted or corroded. Inspect under panel. Replace if cracked, distorted or corroded.
