PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Service Manual DF40, DF50 Removal Inspection Installation [147][Df40, Df50]

Produtos Relacionados:
Service Manual DF40, DF50 Removal Inspection Installation [147][Df40, Df50]
99500-87J08-01E
Suzuki Marine

THERMOSTAT


REMOVAL

  • Disconnect water hose (1) from thermostat cover.
  • Remove the four (4) bolts (2) securing the thermostat cover, then remove the cover (3) and thermostat (4).


INSPECTION

  • If salt deposits, corrosion, wear or other damage is found, clean or replace.

  • Thermostat operation
    Check thermostat opening temperature as follows :

  • Insert a length of thread between thermostat valve / body and suspend thermostat in a container filled with water.

  • Place thermometer in container and heat water.

    Observe water temperature when thermostat valve opens and releases thread.

Thermostat operating temperature
Standard : 48 – 52 °C (118 – 126 °F)


INSTALLATION
Installation is reverse order of removal with special attention to the following steps.

  • Assemble thermostat (1), gasket (2) and thermostat cover (3) to cylinder head block and secure with bolts.
Share on social:

Produtos Relacionados