PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Service Manual DF40, DF50 Ptt Motor Relay [293][Df40, Df50]

Produtos Relacionados:
Service Manual DF40, DF50 Ptt Motor Relay [293][Df40, Df50]
99500-87J08-01E
Suzuki Marine

SWIVEL BRACKET BUSH

The swivel bracket bush has been changed in shape.

TILLER HANDLE ASSY

The wire connector of the tiller handle assy has been changed to 16-pin connector.

PTT MOTOR RELAY

The PTT relays (for UP and for DOWN) have been incorporated and changed in shape.

In accordance with the change of PTT relay, the lead connector of PTT motor and lead grommet have been changed.

PTT MOTOR RELAY

INSPECTION

  1. Disconnect battery cable from battery.

  2. Disconnect all cables/lead wires from PTT relay.

  3. Check resistance between each two (2) lead wires.

Between “P” wire and “B” wire: 25 – 37 Ω
Between “Lbl” wire and “B” wire: 25 – 37 Ω

  1. Connect “R” wire to positive (+) terminal, and black wire to negative (-) terminal of 12 V battery.

Each operation test must be performed within 3 – 5 seconds to avoid overheat damage to the relay coil.

  1. Temporarily connect a jumper wire from the “P” lead wire to the battery positive + terminal, then check voltage between “G” wire and “B” wire.

Between “G” wire and “B” wire: 12 V (Battery voltage)

  1. Temporarily connect a jumper wire from the “Lbl” lead wire to the battery positive + terminal, then check voltage between “Bl” wire and “B” wire.

Between “Bl” wire and “B” wire: 12 V (Battery voltage)

  1. If inspection in step 3 and/or step 5, 6 fails, replace PTT relay.
Share on social:

Produtos Relacionados