PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Service Manual DF40, DF50 Installation [121][Df40, Df50]

Produtos Relacionados:
Service Manual DF40, DF50 Installation [121][Df40, Df50]
99500-87J08-01E
Suzuki Marine

Installation

  1. Remove two bolts and high pressure fuel filter (13).
  2. Disconnect lead wire connectors (14) from all fuel injectors.

  1. Remove four (4) bolts and Throttle body (15).

Remove IAC valve hose (16) from Throttle body.

  1. Remove bolts and nuts, and then remove intake manifold assembly (17).

INSTALLATION

Installation is reverse order of removal with special attention to the following steps.

Do not re-use gasket once removed. Always use a new gasket.

  • Apply the bond to both mating surfaces of the intake manifold gasket.

99000-31140 : Suzuki Bond 1207B

  • Tighten bolts and nuts securely.

Intake manifold bolt & nut :
  6 mm 11N•m (1.1 kg⋅m, 8.0 lb⋅ft.)
  8 mm 23N•m (2.3 kg⋅m, 16.5 lb⋅ft.)

  • Check to ensure that all removed parts are back in place.

Checking

  • Check fuel and water hose routing. (See page 10-7 to 10-9)
  • Check wire routing (See page 10-1 to 10-6)
  • Check for fuel leakage. (See page 5-3)
  • Check for water leakage.
Share on social:

Produtos Relacionados