PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Service Manual DF40, DF50 Idle Speed [335][Df40, Df50]

Produtos Relacionados:
Service Manual DF40, DF50 Idle Speed [335][Df40, Df50]
99500-87J08-01E
Suzuki Marine

ENGINE SERIAL NUMBER

The engine serial number starts from the following six-figure number located after the model prefix.

PERIODIC MAINTENANCE

IDLE SPEED

Inspect initially after 20 hours (1 month) and every 200 hours (12 months).

Change the idle speed adjustment procedure as following:

The idle adjustment of 2008 model can be performed by fixing duty of IAC valve as well as DF150 – 250 model.

• Before checking idle speed, the engine should be allowed to warm up.
• Check and/or adjust idle speed after engine speed has stabilized.

  1. Remove the bolt and No.1 ignition coil.
  2. Connect special tool between No.1 ignition coil and spark plug.

09930-88720 : H · T cord with plug cap adapter

  1. Start engine and allow to warm up.
  2. Attach engine tachometer to the ignition H. · T cord.

09900-26006 : Engine tachometer
5. Check engine speed .

Idle speed (no load): 800 – 900 r/min

ADJUSTMENT:

If the idle speed is out of specification, adjust it as follows:

  1. Shift into neutral and close the throttle fully.
  2. To set the IAC valve duty to constant 22.5 %, turn the ignition key from ON to START five times within ten seconds. At this time, the caution buzzer will sound to notify that IAC duty is in fixed mode.

• The ignition key operation should be performed with the engine running at idle.
• While IAC valve duty is at a fixed 22.5 % duty, the caution buzzer will sound in a repeating pattern of 0.5 second on with an interval of 3 seconds off.
• The fixed mode will continue for 5 minutes.

  1. During this fixed mode, adjust engine speed to 850 ± 50 r/min by turning by-pass air screw.

Turning air screw counterclockwise:
Engine speed will increase.
Turning air screw clockwise:
Engine speed will decrease.

  1. When finished adjusting the idle speed, opening the throttle will cancel the (IAC) fixed mode.

  2. Return the throttle to fully close and check engine speed. It should now be stable at 800 – 900 r/min.

Trolling speed (in- gear) is same as idle speed.

Share on social:

Produtos Relacionados