PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Service Manual DF40, DF50 Engine Control System [336][Df40, Df50]

Produtos Relacionados:
Service Manual DF40, DF50 Engine Control System [336][Df40, Df50]
99500-87J08-01E
Suzuki Marine

Sections:

  1. ECM
  2. WIRING HARNESS

ECM

The program (internal circuit) of ECM has been changed.

This change is performed by following reasons:

  1. Addition of the IAC valve fixing mode.

  2. Accommodation of the optional digital gauges (Teleflex gauges).

Part Name Early (’07 model)Part Number Interchange-ability Late (’08 model)Part Number
ECM (DF40_E01) 33920-87J92 Yes ← → No 33920-87J93
ECM (DF40_E03) 33920-87JA2 Yes ← → No 33920-87JA3
ECM (DF50_E01) 33920-87JB2 Yes ← → No 33920-87JB3
ECM (DF50_E03, E40) 33920-87JC2 Yes ← → No 33920-87JC3

WIRING HARNESS

  • The shape of the SDS communication connector has been changed, as shown in the figure, to connect SDS-Ver.5 without conversion harness.
  • The optional digital gauge operating signal is output from the three lead wires in this connector. For this reason, when the
    optional gauge (Teleflex gauge) is used, the connector (A) for
    the standard gauge in the wiring harness in the figure should
    be connect with the SDS communication connector.

1 SDS Communication connector for SDS or optional digital gauge.

Share on social:

Produtos Relacionados