PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Service Manual DF40, DF50 Cylinder Head Assembly [136][Df40, Df50]

Produtos Relacionados:
Service Manual DF40, DF50 Cylinder Head Assembly [136][Df40, Df50]
99500-87J08-01E
Suzuki Marine

CYLINDER HEAD ASSEMBLY

REMOVAL

(Cylinder head / valve / camshaft)

Prior to removing cylinder head :

  • Remove the power unit. (see page 6-3 to 6-6)

  • Remove the timing chain. (see page 6-15 to 6-16)

  1. Remove the bolts securing the camshaft housing to cylinder head, then remove each camshaft housing.

For ease of assembly, note position of each individual camshaft housing.

  1. Remove intake and exhaust camshafts.

  1. Loosen ten (10) cylinder head bolts in the order indicated in figure and remove them.

  2. Remove cylinder head assembly and head gasket.

Use a special tool (10mm deep socket wrench) when loosening the cylinder head bolts.

TOOL 09919-16010 : Deep socket wrench (10 mm)

INSTALLATION

Installation is reverse order of removal with special attention to the following steps.

Do not re-use gasket. Always use a new gasket.

  1. Insert the dowel pins and place a new cylinder head gasket into position on the cylinder.
Share on social:

Produtos Relacionados