PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Service Manual DF40, DF50 Crankcase [358][Df40, Df50]

Produtos Relacionados:
Service Manual DF40, DF50 Crankcase [358][Df40, Df50]
99500-87J08-01E
Suzuki Marine

CRANKCASE BOLT

The surface treatment of the crankcase bolt has been changed. The tightening of the case bolts is performed in three stages. However, with this change effected, the torque specification for the second tightening stage has been changed. The torque specifications for the first and the final tightening remains unchanged.

Crankcase bolt tightening torque

2nd step 10 mm 37 N·m → 23 N·m

2nd step 8 mm 20 N·m → 13 N·m

CRANKCASE TO CYLINDER

  1. Clean mating surface of cylinder and crankcase.

  2. Apply sealant to mating surface of crankcase as shown.

Apply sealant to mating surface only.
Do not allow sealant to contact surface of bearing.

99000-31140: Suzuki Bond 1207B

  1. Install four (4) dowel pins (1).

  1. Install crankcase to cylinder.

  2. Apply engine oil to crankcase bolts.

  3. Tighten crankcase bolts in three (3) steps following the order indicated below.

After tightening crankcase bolts, check to be sure that crankshaft rotates smoothly when turned by hand.

Crankcase bolt

1st step 8 mm 5 N·m (0.5 kg-m, 3.5 lb.-ft.)

        10 mm 10 N·m (1.0 kg-m, 7.0 lb.-ft.)

2nd step 8 mm 13 N·m (1.3 kg-m, 9.5 lb.-ft.)

        10 mm 23 N·m (2.3 kg-m, 16.5 lb.-ft.)

Final step 8 mm 25 N·m (2.5 kg-m, 18.0 lb.-ft.)

        10 mm 46 N·m (4.6 kg-m, 33.5 lb.-ft.)

Share on social:

Produtos Relacionados