Precautions
Precaution for Power Trim and Tilt
Failure to take proper precaution when servicing a PTT unit can cause severe personal injury.
Be sure to take the following precautions when servicing the PTT system:
• During removal or installation of PTT unit, the engine must be firmly secured and its weight fully supported by the hoist.
• Before checking PTT fluid level, tilt the motor to the full-up position and engage the tilt lock lever.
• To prevent system malfunctions, ensure that all components are kept free from dirt or contamination.
• Reinstall all O-rings, seals, springs etc. with the component(s) to which they belong. This will prevent possible confusion and will ensure correct reassembly.
