PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Service Manual 5009009_115–200 HP 60°V - V4 AA-AE - V6 AA Midsection [Extensions Service V4 Models]

Produtos Relacionados:
Service Manual 5009009_115–200 HP 60°V - V4 AA-AE - V6 AA Midsection [Extensions Service V4 Models]
5009009
BRP Marine

EXTENSION SERVICE – V4 MODELS

Removal

Remove six screws retaining extension.

  1. Screws

Remove extension.

Remove grommets and seal.

Installation

Apply Adhesive 847 to the shift rod and water tube flange of the extension. Install new grommets.

Apply Triple-Guard grease to outer grommet surfaces.

Apply Adhesive 847 to the bottom flange of the extension. Install a new seal.

Apply Triple-Guard grease to outer seal surface.

  1. Adhesive 847
  2. Triple-Guard grease

Install extension with six screws and tighten to a torque of 18 to 20 ft lb. (24 to 27 N•m).

STERN BRACKET

Stern Bracket Disassembly

Before servicing the stern bracket:

  • Remove gearcase. Refer to Gearcase GEARCASE REMOVAL AND INSTALLATION on p. 294.
  • Remove powerhead. Refer to Powerhead POWERHEAD REMOVAL on p. 220.
  • Remove exhaust housing. Refer to Exhaust Housing Exhaust Housing Removal on p. 268.
  • Remove power trim/tilt unit. Refer to TRIM AND TILT section.

Remove and discard steering shaft locknut.

Remove the lower mount bracket and keeper.

Share on social:

Produtos Relacionados