PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Service Manual 5008740_200-300 HP 90 ° V Gearcase [Shift Rod Adjustment]

Produtos Relacionados:
Service Manual 5008740_200-300 HP 90 ° V Gearcase [Shift Rod Adjustment]
5008740
BRP Marine

Gearcase

On 25 in. and 30 in. models, place the appropriate water tube spacer and grommet on the impeller housing cover.

  1. Spacer

  2. Grommet

After water pump is assembled completely, rotate driveshaft counter clockwise 1/4 turn to unlock and release impeller and key from driveshaft.

Next, pull up on driveshaft and turn clockwise to lock impeller to shaft. This process increases pump efficiency by locking the impeller lower on the driveshaft.

Before installing gearcase, shift rod adjustment MUST be checked. Refer to SHIFT ROD ADJUSTMENT on p. 295.

SHIFT ROD ADJUSTMENT

Check the shift rod height from the shift rod hole to the surface of the gearcase using Universal Shift Rod Height Gauge, P/N 389997.

With the gearcase in NEUTRAL , rot ate the shift rod up or down as necessary for correct adjustment. Once correct height is achieved, rotate rod one half turn or less to direct offset forward.

IMPORTANT: The NEUTRAL detent is a two step design. Make sure the NEUTRAL detent ball is in the center step before checking shift rod height.

Shift Rod Heights

Model Type Height
20 in. (L) “L2”“M2” 21 29/32 in.(21.906 in./ 556 mm)± 1/2 Half Turn
25 in. (X) “L2”“M2” 26 29/32 in.(26.906 in./ 683 mm)± 1/2 Turn
30 in. (Z) “M2” 31 29/32 in.(31.906 in./ 810 mm)± 1/2 Turn
Share on social:

Produtos Relacionados