PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Service Manual 5008330_55 HP MFE Gearcase [Propeller Service Mrl Models]

Produtos Relacionados:
Service Manual 5008330_55 HP MFE Gearcase [Propeller Service Mrl Models]
5008330
BRP Marine

PROPELLER SERVICE, MRL MODELS

Inspection

Carefully examine propeller and outboard for the following:

  • Damaged blades and signs of propeller cavita tion (burned paint, etc.)
  • Spun or overheated inner hub
  • Worn or twisted splines and inadequate lubri cant
  • Damaged or missing converging ring (if applica ble)
  • Damage to outer hub area
  • Worn, missing, or incorrect thrust washer and spacer
  • Correct size and style
  • Check for bent or damaged propeller shaft and twisted splines.

Refer to Propeller Hardware Installation on p. 42.

When servicing the propeller, always shift the outboard to NEUTRAL, turn the key switch OFF, and disconnect the battery positive (+) cable so the outboard cannot be started accidentally

IMPELLER SERVICE, MJRL MODELS

Inspection

To prevent accidental starting while servicing, twist and remove all spark plug leads.

Use a 3/16 Ballhex driver to remove the six impeller housing screws. Remove the impeller housing.

Insert a 1/8 in. shim between the impeller and the impeller housing. If the shim moves freely for the entire length of the impeller blade tip on any of the blades, the impeller is worn and must be replaced.

Rotate the impeller 30° and repeat the inspection.

Share on social:

Produtos Relacionados