PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Service Manual 25-30 HP E-TEC Manual Starter [Recoil Starter Cleaning And Inspection]

Produtos Relacionados:
Service Manual 25-30 HP E-TEC Manual Starter [Recoil Starter Cleaning And Inspection]
5007802
BRP Marine

MANUAL STARTER

Turn housing over and tap on bench to remove spring.

Keep fingers away from uncoiling spring.
Do NOT remove spring with housing facing up. Do NOT lift spring out of housing by hand or with pliers.
Spring is under tension and will cause injury if accidentally released.

Remove two screws. Remove the rope guide.

  1. Screws

RECOIL STARTER CLEANING AND INSPECTION

Wash metal components in solvent and dry with compressed air.

Inspect the rewind spring for broken end loops and weak tension.

Examine the starter pawl for wear.

Inspect the starter components for wear. Replace as necessary.

Inspect starter rope. Replace rope if frayed. Cut new rope 80 in. (203 cm) in length. Fuse ends of rope to a length of 1/2 in. (12 mm).

Examine the pulley and the starter housing. Look for sharp edges and rough surfaces that could fray the starter rope. File and polish to remove.

Examine the starter. Replace any worn or damaged parts.

Share on social:

Produtos Relacionados