PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Service Manual 200-300 HP E-TEC Gearcase [Gearcase Housing Inspection]

Produtos Relacionados:
Service Manual 200-300 HP E-TEC Gearcase [Gearcase Housing Inspection]
5007820
BRP Marine

Gearcase Housing Inspection

Remove propeller shaft assembly from gearcase.


006839

Water Intake Screens

Remove and clean water intake screens. Replace if damaged.


006886

  1. Water intake screen

Thoroughly clean gearcase housing to remove all dirt and debris prior to inspection. Inspect pinion bearing and forward thrust surface of gearcase housing.

Use Gearcase Alignment Gauge Kit, P/N 5006349 to check the condition of gearcase housing prior to reassembly. Refer to instructions provided with kit. Use additional Gauging Head as follows:

  • P/N 5007750, for “L2” Type gearcase housings
  • P/N 5007749, for “M2” Type gearcase housings


006787

IMPORTANT: DO NOT force gauging shaft into alignment hole. Shaft MUST slide easily into hole of gauging head. If shaft does not slide into hole, gearcase housing is damaged and must be replaced.


004347

  1. Gauging shaft
Share on social:

Produtos Relacionados