Service Manual 115-200 HP E-TEC Engine Cover Service [Engine Cover Service]

Latch Hook Installation

Insert threaded bracket into pocket.

• 1. Bracket

Apply Ultra-Lock to screw threads. Place hook into position. Tighten screws to a torque of 60 to 84 in. lbs. (7 to 9.5 N·m).

Upper Cover Cap Replacement

Place new upper cap into position.

Tighten self-tapping screws to a torque of 24 to 36 in. lbs. (2.7 to 4 N·m).

• 1. Upper cap screws