PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Power Unit [Flywheel Magneto And Magneto Base] [2002]

Produtos Relacionados:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 1997 - 2003 15hp All
Yamaha Outboard 1997 - 2003 9.9hp All
Yamaha International 2001 - 2003 9.9hp All
Yamaha International 2001 - 2003 15hp All

Power Unit [Flywheel Magneto And Magneto Base] [2002]
LIT-18616-01-65
Yamaha Marine

EXPLODED DIAGRAM

REMOVAL AND INSTALLATION CHART

Step Procedure/Part name Q’ty Service points
FLYWHEEL MAGNETO AND MAGNETO BASE REMOVAL Follow the left "Step" for removal.
Recoil starter assembly Refer to the "RECOIL STARTER" section.
1 Nut 1
2 Plane washer 1
3 Flywhee 1
4 Woodruff key 1
5 Bolt (with washer) 2
6 Charge coil 1
7 Collar 2
8 Bolt (with washer) 2
9 Lighting coil 1
10 Collar 2
11 Magneto base plate 1
12 Pulser coil assembly 1
Reverse the removal steps for installation.

Service points

Flywheel magneto removal

  1. Remove and install:
    • Flywheel nut

Flywheel holder:
YB-06139/90890-06522
[A] For USA and CANADA
[B] Except for USA and CANADA

CAUTION: The major load should be carried in the direction of the arrows. If not, the holder may easily slip off.

  1. Remove:
    • Flywheel magneto

Flywheel puller: YB-06117/90890-06521

[A] For USA and CANADA
[B] Except for USA and CANADA

CAUTION:
• Keep the nut side flush with the crankshaft end until the flywheel comes off the
tapered portion of the crankshaft.
• To prevent damage to the engine or tools,screw in the flywheel magneto- puller set bolts evenly and completely so thatthe puller plate is parallel to the flywheel

Share on social:

Produtos Relacionados