PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Periodic Inspection And Adjustment [Lower Unit:Bracket Unit] [1996]

Produtos Relacionados:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 1996 150hp All
Yamaha Outboard 1996 175hp All
Yamaha Outboard 1996 200hp All
Yamaha Outboard 1996 225hp All
Yamaha Outboard 1996 250hp All

Periodic Inspection And Adjustment [Lower Unit:Bracket Unit] [1996]
LIT-18616-01-41
Yamaha Marine

LOWER UIMIT/BRACKET UNIT

Pressure tester: YB-03595/90890-06762

  • Apply the specified pressure

Pressure: 100 kPa (1.0 kg/cm2,14.2 psi)

  • Check that the pressure is held as specified for 10 seconds.

NOTE:
Do not over-pressurize. Excess pressure may cause the air to leak out.

BRACKET UNIT

Cowling hook adjustment

  1. Inspect:
  • Cowling lock and release
    Weak engagement -> Adjust

Adjustment steps:

  • Remove the top cowling.
  • Loosen the bolts by approximately a quarter turn.
  • Tap the end of the hook to make an approximate adjustment.

Moving the hook towards the seal -> Loosen the cowling.

Moving the hook away from the seal -> Tighten the cowling.

  • Tighten the bolts
Share on social:

Produtos Relacionados