PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

OE 2012 Evinrude Portable Outboards Installation & Predelivery Guide (P-N 5008855) - Technical Specifications Steering Systems [Outboard Installation]

Produtos Relacionados:
OE 2012 Evinrude Portable Outboards Installation & Predelivery Guide (P-N 5008855) - Technical Specifications Steering Systems [Outboard Installation]
5008855
BRP Marine

Mechanical Cables

All Evinrude outboards equipped with tilt tubes are compatible with mechanical steering systems that meet ABYC Standard P-17. Single-cable mechanical steering systems can be used on single or dual-outboard installations if an ABYC-approved
steering link is used.
Extend the steering cable and lubricate the inner core before installation.

ABYC-approved mechanical steering cable.

IMPORTANT: Install steering cable through tilt tube before mounting outboard on transom. Tighten nut securely.

Use the correct drag link to allow full steering travel:

Model Drag Link
9.8 HP P/N 5040355
15 HP P/N 5040800

Install steering cable wiper nut on tilt tube. Connect the drag link to the steering bracket with the provided hardware as shown. Tighten drag link
nuts to 20 ft. lbs. (27 N·m).

9.8 HP Models

  1. Steering bracket
  2. Drag link connection
  3. Drag link nut

15 HP Models

  1. Steering bracket
  2. Drag link connection
  3. Drag link nuts
Share on social:

Produtos Relacionados