PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Lower Unit [Lower Unit(F50:F50A)] [2004]

Produtos Relacionados:

Applicable Models

Model group Year Model Serial
Yamaha International 2004 60hp All
Yamaha Outboard 2004 60hp All

Lower Unit [Lower Unit(F50:F50A)] [2004]
LIT-18616-FT-60
Yamaha Marine

Lower unit

No. Part name Q'ty Remarks Tightening torues
Stage N-m kgf-m ft-lb
1 Lower unit 1
2 Plastic tie 1 Not reusable
3 Hose 1
4 Check screw 1 7 0.7 5.1
5 Gasket 2 Not reusable
6 Bolt 4 M10 x 40 mm 40 4.0 29
7 Drain screw 1 7 0.7 5.1
8 Dowel pin 2
9 Bolt 1 M8 x 35 mm
10 Anode 1
11 Bolt 1
12 Thrust washer 1
13 Propeller 1
14 Washer 1
15 Washer 1
16 Cotter pin 1 Not reusable
17 Propeller nut 1 35 3.5 25
18 Trim tab 1
19 Bolt 1 M8 x 20 mm

Removing the lower unit

  1. Drain the gear oil. For draining procedures, see Chapter 3, “Replacing the gear oil.”

  2. Set the gearshift to the neutral position,and place a block of wood between the anti-cavitation plate and propeller to keep the propeller from turning, and then remove the propeller nut and propeller

WARNING
Do not hold the propeller with your hands when loosening or tightening it. Be sure to remove the battery leads from the batteries and the engine stop lanyard switch. Put a block of wood between the cavitation plate and propeller to keep the propeller from turning.

  1. Disconnect the speedometer hose (1).

  2. Mark the trim tab (2) at the area shown, and then remove it.

  1. Loosen the bolts, and then remove the lower unit from the upper case.

Share on social:

Produtos Relacionados