PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

General Information [Safety While Working] [2008]

Produtos Relacionados:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 1997 - 2005 8hp All
Yamaha International 2001 - 2005 8hp All
Yamaha Outboard 1997 - 1999 6hp All
Yamaha International 2001 - 2005 6hp All

General Information [Safety While Working] [2008]
LIT-18616-01-64
Yamaha Marine

SAFETY WHILE WORKING

The procedures given in this manual are those recommended by Yamaha to be followed by Yamaha dealers and their mechanics.

FIRE PREVENTION

Gasoline (petrol) is highly flammable. Petroleum vapor is explosive if ignited. Do not smoke while handling, and keep it away from heat, sparks, and open flames.

VENTILATION

Petroleum vapor is heavier than air and if inhaled in large quantities will not support life. Engine exhaust gases are harmful to breathe. When test-running an engine indoors, maintain good ventilation.

SELF-PROTECTION

Protect your eyes with suitable safety spectacles or safety goggles when using com pressed air, when grinding or when doing any operation which may cause particles to fly off. Protect hands and feet by wearing safety gloves or protective shoes if appropriate to the work you are doing.

OILS, GREASES AND SEALING FLUIDS

Use only genuine Yamaha oils, greases and sealing fluids or those recommended by Yamaha.

Under normal conditions of use, there should be no hazards from the use of the lubricants mentioned in this manual, but safety is all-important, and by adopting good safety practices, any risk is minimized.

A summary of the most important precautions is as follows:

  1. While working, maintain good stan dards of personal and industrial hygiene.

  2. Clothing which has become contaminated with lubricants should be changed as soon as practicable, and laundered before further use.

  3. Avoid skin contact with lubricants; do not, for example, place a soiled wiping rag in one's pocket.

  4. Hands, and any other part of the body which have been in contact with lubricants or lubricant-contaminated clothing, should be thoroughly washed with hot water and soap as soon as practica ble.

  5. To protect the skin, the application of a suitable barrier cream to the hands before working is recommended.

  6. A supply of clean lint-free cloths should be available for wiping purposes.

GOOD WORKING PRACTICES

  1. The right tools
    Use the special tools that are advised to protect parts from damage. Use the right tool in the right manner — don't improvise.

  2. Tightening torque
    Follow the torque tightening instructions. When tightening bolts, nuts and screws, tighten the large sizes first, and tighten inner-positioned fixings before outer-positioned ones.

  1. Non-reusable items
    Always use new gaskets, packings, Orings, split-pins and circlips etc. on reassembly

DISASSEMBLY AND ASSEMBLY

  1. Clean parts with compressed-air on dis assembling them.

  2. Oil the contact surfaces of moving parts on assembly

  1. After assembly, check that moving parts operate normally.

  2. Install bearings with the manufacturer's markings on the side exposed to view, and liberally oil the bearings.

  3. When installing oil seals, apply a light coating of water-resistant grease to the outside diameter

Share on social:

Produtos Relacionados