SPECIAL TOOLS
The use of correct special tools recommended by Yamaha will aid the work and enable accurate assembly and tune-up. Improvisations and use of improper tools can cause damage to the equipment..
SPECIAL TOOLS FOR TUNE-UP
| Ref. No. | Tool name | Part number |
|---|---|---|
| 1 | Test propeller | YB-1621 |
| 2 | Timing light | YM-33277 |
| 3 | Dial gauge set | YU-3097 |
| 4 | Compression gauge | YU-33223-1 |
| 5 | Ignition coil tester | YU-33261 |
| 6 | Digital multimeter | YU-33263 |
| 7 | Tachometer | YU-8036-A |
SPECIAL TOOLS FOR ENGINE SERVICE
| Ref. No. | Tool name | Part number |
|---|---|---|
| 1 | Attachment B | YB-6015 |
| 2 | Attachment E | YB-6021 |
| 3 | Handle | YB-6071 |
| 4 | Con-rod small end bearing installer | YB-6107 |
| 5 | Universal puller | YB-6117 |
| 6 | Flywheel magneto holder assembly | YB-6139 |
| 7 | Bearing separator | YB-6219 |
SPECIAL TOOLS FOR LOWER UNIT SERVICE
| Ref.No. | Tool name | Part number |
|---|---|---|
| 1 | Drive handle-large | YB-6071 |
| 2 | Pinion nut wrench | YB-6078 |
| 3 | Needle bearing remover | YB-6082 |
| 4 | Outer race installer-forward gear | YB-6085 |
| 5 | Slide hammer puller assembly | YB-6096 |
| 6 | Oil seal installer | YB-6168 |
| 7 | Driver handle-small | YB-6229 |
| 8 | Bearing housing puller | YB-6234 |
| 9 | Backlash indicator rod | YB-6265 |
| 10 | Shimming gauge | YB-6344 |
| 11 | Needle bearing remover & installer | YB-6346 |
| 12 | Drive shaft holder | YB-6368 |
| 13 | Reverse gear shimming gauge | YB-6400 |
| 14 | Backlash adjusting plate | YB-7003 |
| 15 | Lower unit pressure | YB-35956 |
| 16 | Dial gauge | YU-3097 |
| 17 | Magnetic flexible dial base | YU-34481 |
SEALING AGENTS AND LUBRICANTS
| Ref.No | Part name | Part number |
|---|---|---|
| 1 | Gasket maker | 90790-74001-00 |
| 2 | Yamalube two cycle outboard oil | ACC-11000-07-01 |
| 3 | Marine grease | LUB-GEARS-14-00 |
| 4 | Gear case lube (11 oz) | LUB-GEARL-11-00 |
