SPECIAL TOOLS
The use of correct special tools recommended by Yamaha will aid the work and enable accurate
assembly and tune-up. Improvisations and use of improper tools can cause damage to the equipment.
SPECIAL TOOLS FOR TUNE-UP
| TOOL NAME | PART NO |
|---|---|
| Throttle Sensor Adjusting Lead | YB-06443 |
| Diagnostic Flash | YB-06444 |
| Lower Unit Pressure/Vacuum Tester | YB-35956 |
| Digital Multimeter | YU-34899-A |
| Compression Gauge | YU-33223-1 |
SPECIAL TOOLS FOR ENGINE SERVICE
| TOOL NAME | PART NO. |
|---|---|
| Universal Puller | YB-6 1 1 7 |
| Flywheel Magneto Holder | YB-6139 |
| Bearing Splitter Plate | YB-6219 |
| Eye Nut | YB-06442 |
| Piston Ring Compressor | YB-34454 |
| Micrometer (75— 100 mm) | YU-3009 |
| Cylinder Bore Gauge (50—100 mm) | YU-3017 |
| Dial Indicator | YU-3097 |
| Feeler Gauge (in) | YU-26900-8 |
| Feeler Gauge (mm) | YU-26900-9 |
| Magnetic Flexible Dial Base | YU-34481 |
SPECIAL TOOLS FOR LOWER UNIT SERVICE
| TOOL NAME | PART NO. |
|---|---|
| Pinion Gear Bushing Installer | YB-6029 |
| Driver Handle-Large | YB-6O71 |
| Slide Hammer | YB-6O96 |
| Driveshaft Needle Bearing Remover/lnstaller | YB-6196 |
| Driveshaft Holding Tool | YB-6201 |
| Needle Bearing Remover/lnstaller Guide | YB-6213 |
| Backlash Indicator Gauge | YB-6265 |
| Forward Gear Bearing Cup Installer | YB-6276 |
| Propeller Shaft and Bearing Housing Remover | YB-6335 |
| Ball Bearing Installer | YB-06430 |
| Outer Race Installer | YB-O6431 |
| Roller Bearing Remover/lnstaller | YB-O6432 |
| Bearing Separator | YB-06436 |
| Bushing Remover/lnstaller | YB-06437 |
| Shimming Gauge | YB-06439 |
| Pinion Shimming Gauge 1 | YB-06441-1 |
| Pinion Shimming Gauge 2 | YB-06441-2 |
| Backlash Adjusting Plate | YB-7OO3 |
| Driveshaft Puller | YB-34449 |
| Lower Unit Pressure/Vacuum Tester | YB-35956 |
| Dial Indicator | YU-3097 |
| Feeler Gauge (in) | YU-26900-8 |
| Feeler Gauge (mm) | YU-26900-9 |
| Magnetic Flexible Dial Base | YU-34481 |
SPECIAL TOOLS FOR COUNTER ROTATION LOWER UNIT SERVICE
| TOOL NAME | PART NO. |
|---|---|
| Gland Nut Wrench | YB-6048 |
| Universal Puller | YB-61 17 |
| Bearing Housing Puller | YB-6207 |
| Bearing Splitter Plate | YB-6219 |
| Bearing Puller Legs | YB-6334 |
| Needle Bearing Installer | YB-6337 |
| Ball and Taper Roller Bearing Installer | YB-06430 |
| Stopper Ring | YB-O6433 |
| Needle Bearing Remover/lnstaller | YB-06434 |
| Needle Bearing Installer | YB-O6435 |
| Shimming Gauge | YB-06440 |
SPECIAL TOOLS FOR POWER TRIM AND TILT SERVICE
| TOOL NAME | PART NO |
|---|---|
| Trim and Tilt Cylinder Wrench | YB-6175 |
SEALING AGENTS AND LUBRICANTS
| NO. | TOOL NAME | PART NO. | PART NO. |
|---|---|---|---|
| FOR U.S.A. | FOR CANADA | ||
| 1 | Gasket Maker | 907-90740-01-00 | 90790-74001-00 |
| 2 | Marine Grease A | LUB-GREAS-14-00 | 90890-69910-00 |
| 3 | Power Trim and Tilt Fluid | LUB-PWRTF-11-00 | — |
| 4 | Gear Case Lubricant | LUB-GEARL-11-00 | ACC-11000-85-00 |
| 5 | Yamaha Two-Cycle Outboard Oil | ACC-11000-07-01 | ACC-11000-20-01 |
