PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Bracket Unit [Tilt Cylinder, Pump Housing And Motor] [1998]

Produtos Relacionados:

Applicable Models

Model group Year Model Serial
Yamaha International 1998 25hp All
Yamaha Outboard 1998 25hp All

Bracket Unit [Tilt Cylinder, Pump Housing And Motor] [1998]
LIT-18616-01-77
Yamaha Marine

EXPLODED DIAGRAM

REMOVAL AND INSTALLATION CHART

Step Procedure/Part name Q'ty Service points
TILT CYLINDER, PUMP HOUSING, AND MOTOR REMOVAL Follow the left "Step" for removal.
1 Reservoir plug 1
2 O-ring 1 8.8x 1.9 mm
3 PTT motor 1
4 Connector shaft 1
5 Tilt cylinder 1
6 Ball 2
7 Plunger 2
8 Spring 2

EXPLODED DIAGRAM

Step Procedure/Part name Q'ty Service points
9 O-ring 4 5.5 x 1.5 mm
10 O-ring 3 10.7 x 1.5 mm
11 Screen 1

Reverse the removal steps for installation

SERVICE POINTS

• To prevent the hydraulic fluid from spurting out due to internal pressure, the outboard should be kept fully tilted up (the tilt rod at full length).
• After removing the tilt motor or oil reservoir, do not push the tilt rod down. This may cause hydraulic fluid to spurt out from the port.

Do not wipe hydraulic system components with rags, paper, tissues, or the like, as fibers from such material will cause malfunctions if they enter the system.

Removal of the tilt cylinder is not necessary for cylinder repair.

Share on social:

Produtos Relacionados