PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Bracket Unit [Power Trim And Tilt Unit] [2004]

Produtos Relacionados:

Applicable Models

Model group Year Model Serial
Yamaha International 2004 60hp All
Yamaha Outboard 2004 60hp All

Bracket Unit [Power Trim And Tilt Unit] [2004]
LIT-18616-FT-60
Yamaha Marine

Power trim and tilt unit

No. Part name Q’ty Remarks Tightening torques
Stage N-m kgf-m ft-lb
1 Power trim and tilt 1 EHT/ET models
2 Hydro tilt 1 EHD/ED models
3 Plastic tie 3 Not reusable
4 PTT motor lead 2
5 Washer 2
6 Bolt 2 M8 x 16 mm
7 Circlip 1 EHT/ET models
8 Shaft 1 EHT/ET models
9 Bushing 2 EHT/ET models
10 Collar 1 EHT/ET models
11 Tilt pin 1
12 Collar 1
13 Collar 1
14 Shaft 1
15 Bushing 2 EHD/ED models
16 Circlip 2 EHD/ED models
17 Shaft 1 EHD/ED models
18 Collar 1 EHD/ED models

Removing the power trim and tilt/hydro tilt

  1. Fully tilt the outboard up, and then support it with the tilt stop lever (1).

S62Y7440

WARNING
After tilting up the outboard, be sure to support it with the tilt stop lever.

Otherwise, the outboard could suddenly lower if the power trim and tilt unit should lose fluid pressure.

  1. Loosen the plastic locking tie (2), and then pull out the PTT motor lead (3).

  2. Remove the tilt pin (4).

  3. Remove the circlip(s) (5) and the shaft (6).

  4. Loosen the bolt (7), and then remove the shaft (8).

  5. Remove the power trim and tilt/hydro tilt (9).

NOTE:
To remove the power trim and tilt/hydro tilt, lower the tilt rod slightly.

Share on social:

Produtos Relacionados