PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Bracket Unit [Bracket Unit] [2008]

Produtos Relacionados:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 1997 - 2005 8hp All
Yamaha International 2001 - 2005 8hp All
Yamaha Outboard 1997 - 1999 6hp All
Yamaha International 2001 - 2005 6hp All

Bracket Unit [Bracket Unit] [2008]
LIT-18616-01-64
Yamaha Marine

PREPARATION FOR REMOVAL

  • Remove the power unit.
  • Remove the upper casing and bottom cowling.

Extent of removal:

(1) Swivel bracket removal
(2) Clamp bracket removal
(3) Swivel bracket disassembly

INSPECTION

Steering bracket and pivot shaft

  1. Inspect:
    • Steering bracket
    • Pivot shaft
      Crack/Damage ➝ Replace.

Clamp and swivel bracket

  1. Inspect:
    • Clamp bracket
    • Swivel bracket
      Crack/Damage ➝ Replace.

Tilt plate

  1. Inspect:
    • Tilt plate
      Crack/Damage ➝ Replace.

ASSEMBLY AND INSTALLATION

  1. Install:
    • Drive lever (1)
    • Pin (2)
    • Crip (3)

NOTE :
Face the arrow mark (a) upward.

  1. Install:
    • Spring (1)
    • Tilt plate (2) (outer)
    • Spring (3)
    • Tilt plate (4) (inner)
    • Pin (5)
    • Crip (6)

NOTE:
Align the holes of the tilt plate (inner) and (outer), after installing the pin.

  1. Install:
    • Bushing (1)
    • Pin (2)

  1. Install:
    • Clamp bracket (1)
    • Friction piece (2)
    • Bolt (3)
    • Collar (4)
    • Nut (5)

  1. Install:
    • Bolt (1)
    • Plate (2)
    • Nut (3)

Nut : 7 Nm (0.7 m-kg, 5.1 ft-lb)

  1. Install:
    • Steering shaft (1)
    • Washer (2)
    • Bushing (3)

NOTE:
Apply water resistant grease to steering shaft.

  1. Install:
    • Friction piece (1)
    • O-ring (2)
    • Bushing (3)
    • Bushing (4)
Share on social:

Produtos Relacionados