PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Appendices [General Torque Specifications] [1987]

Produtos Relacionados:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 1985 - 1990 9.9hp All

Appendices [General Torque Specifications] [1987]
LIT-18616-FT-99
Yamaha Marine

TIGHTENING TORQUE

Part to be tightened Part to be tightened Part name Thread size Q'ty Tightening torque Tightening torque Tightening torque Remarks
N•m Kgf•m ft•lb
ENGINE:
Crankcase 1st Bolt M6x P1.0 6 6 0.6 4.3
Crankcase 2nd Bolt M6x P1.0 6 12 1.2 8.6
Crankcase 1st Bolt M8x P1.25 4 15 1.5 10.8
Crankcase 2nd Bolt M8x P1.25 4 30 3.0 21.6
Cylinder head 1st Bolt M8x P1.25 6 15 1.5 10.8
Cylinder head 2nd Bolt M8x P1.25 6 30 3.0 21.6
Flywheel Nut 1 100 10.0 72
Spark plug 2 12.5 1.25 9
Connecting rod 1st Bolt M6x P1.0 4 6 0.6 4.3
Connecting rod 2nd Bolt M6x P1.0 4 14 1.4 8.6
Exhaust cover Bolt 7 12 1.2 8.6
Drive gear Nut 1 22.5 2.25 16.2
Driven gear Bolt 1 12 1.2 8.6
UPPERCASE AND GEAR CASE:
Bracket bolt Nut 1 20 2.0 14.4
Tilt stop lever Bolt 2 12 1.2 8.7
Upper side mount rubber Nut 2 21 2.1 15.1
Pinion nut Nut 1 25 2.5 18
Propeller Nut 1 17 1.7 12

GENERAL TORQUE SPECIFICATIONS

This chart specifies torque for standard fasteners with standard I.S.O. pitch treads.
Torque specifications for special components or assemblies are included in the applicable sections of this book. To avoid warpage, tighten multi-fastener assemblies in a crisscross fashion and in progressive stages until full torque is reached. Unless otherwise specified, torque specifications call for clean, dry threads. Components should be at room temperature.

A (Nut) B (Bolt) General torque specifications General torque specifications General torque specifications
Nm m•kg ft•lb
8 mm M5 4.0 0.4 2.9
10 mm M6 8.0 0.8 5.8
12 mm M8 18 1.8 13
14 mm M10 36 3.6 25
17 mm Ml2 42 4.2 30

Share on social:

Produtos Relacionados