PREPARE-SE PARA O INVERNO: de 10 % a 50 % de desconto em todas as peças OEM!

A menos que seja proibido pelo fabricante. Não inclui produtos de reposição ou da marca Crowley Marine. Preço conforme marcado.

Os nossos armazéns encerram na quinta-feira, 26, e na sexta-feira, 27 de novembro. Feliz Dia da Thanksgiving dos Estados Unidos!

Contate-Nos
Procure por Mais de 1 Milhão de Peças Originais
Fáceis de usar  diagramas de peças Melhor preço  de garantia Especializado  suporte ao vivo Mais de 50 anos  servindo velejadores Enorme seleção de peças OEM  -  de 1950 a 2026 A maioria das peças em estoque  -  Cumprimento no mesmo dia
Peças em estoque- Realização no mesmo dia

Appendices [General Specifications] [1986]

Produtos Relacionados:
Appendices [General Specifications] [1986]
LIT-18616-00-06
Yamaha Marine

General specifications

Item\Model 150HP 175HP 200HP
Dimensions:
Overall length 828 mm (35.6 in) 828 mm (35.6 in) 828 mm (35.6 in)
Overall width 602 mm (23.7 in) 602 mm (23.7 in) 602 mm (23.7 in)
Overall height L: 1,587mm (63.4in) UL: 1,714mm (67.5in) L: 1,587mm (63.4in) UL: 1,714mm (67.5in) L: 1,587mm (63.4in) UL: 1,714mm (67.5in)
Transom height (Boat transom) L: 508 mm (20 in) UL: 635 mm (25 in) L: 508 mm (20 in) UL: 635 mm (25 in) L: 508 mm (20 in) UL: 635 mm (25 in)
Weight L: 181kg UL: 185 kg L: 181kg UL: 185 kg L: 181kg UL: 185 kg
Performance:
Full throttle operating range 4,500-5,500 min"’ (r/min) 4,500-5,500 min"’ (r/min) 4,500-5,500 min"’ (r/min)
Maximum output *1 150 Hp/(110.3 kw)/5,000 175 Hp/(128.6 kw)/5,500 200Hp/(147 kw)/5,500
Maximum fuel consumption *2 60 ℓ 67 ℓ 75 ℓ
Engine:
Engine type 2 stroke 2 stroke 2 stroke
Number of cylinders 6 6 6
Total piston displacement 2,596 cm3(158.4 c. in) 2,596 cm3(158.4 c. in) 2,596 cm3(158.4 c. in)
Bore and stroke 90 x 68 mm (3.54 x 2.68 in) 90 x 68 mm (3.54 x 2.68 in) 90 x 68 mm (3.54 x 2.68 in)
Compression ratio 5.5 5.9 5.9
Intake system Reed valve Reed valve Reed valve
Scavenging system Schniirle Schniirle Schniirle
Exhaust system Propeller boss exhaust Propeller boss exhaust Propeller boss exhaust
Lubrication system Precision brend Precision brend Precision brend
Cooling system Water Water Water
Starting system Electric starter Electric starter Electric starter
Ignition system C.D.I. C.D.I. C.D.I.
Spark plug B-7HS10 B-8HS10 B-8HS10
Plug gap 0.9 -1.0mm (0.035~ 0.039 in) 0.9 -1.0mm (0.035~ 0.039 in) 0.9 -1.0mm (0.035~ 0.039 in)
Carburetor starting system Choke type Choke type Choke type
Bracket:
Tilt position Stepless Stepless Stepless
Trim angle 12°-27° 12°-27° 12°-27°
Tilt-up angle 78° 78° 78°
Shallow water cruising angle — — —
Shallow water cruising position — — —
Fuel and oil:
Fuel Regular gasoline (90 or more reserch octane) Regular gasoline (90 or more reserch octane) Regular gasoline (90 or more reserch octane)
Mixing ratio (gas St oil) — — —
Gear oil type Hypoid gear oil SAE #90 Hypoid gear oil SAE #90 Hypoid gear oil SAE #90
Gear oil quantity 910cm³ 910cm³ 910cm³
Fuel tank capacity 24 / (6.34 US gal)
24 ℓ (6.34 US gal) 24 ℓ (6.34 US gal)
Item\Model 150HP 175HP 2OOHP
Drive unit:
Transmission Forward — Neutral — Reverse Forward — Neutral — Reverse Forward — Neutral — Reverse
Gear ratio 1.86 (26/14) 1.86 (26/14) 1.86 (26/14)
Reduction system Bevel gear Bevel gear Bevel gear
Clutch type Clutch dog Clutch dog Clutch dog
Turning direct of propeller Clockwise Clockwise Clockwise
Propeller drive system Spline Spline Spline

Remarks:

The data indicated by *1 is propeller shaft horsepower.

Fuel consumption (*2) varies according to boat type and load.

Specifications are subject to change without prior notice.

Share on social:

Produtos Relacionados