Gauges -Tech™ Series Trim Trim -Outboard 2" 0767210
- Guaranteed fitment for 61 different models
- This is an OEM part manufactured by Evinrude & Johnson, OMC
- Flat rate shipping starting at $4.95
- 30 day return policy
2 Product Questions
Gary Tucek
Answer:
Hello, Gary. There is normally a sensor on the engine that sends it up to the gauge. I will recommend checking with your local dealer or mechanic anyway but, thats an idea from where it should be. Cheers
Landon Mauldin
Answer:
No, this is just the gauge itself. The trim sender must be ordered separately.
2 Product Reviews
1988 110 johnson
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
Problem fixed: Trim gauge and transom trim switch. Ignition coils.
Removed old trim Gauge, traced wires. Installed new one and replaced with proper wires. Removed old Transom Trim Switch. Mounted new one. Jumped wires to make sure the gauge and wires were connected properly. Had to cut back wires at motor and add new wire to connect properly with correct colors. Adjusted switch. Installed new Power Packs and then the Ignition coils, New Plug Wires and Plugs. Made sure wires were routed properly and tied back. Connected engine to water, fired up and ran.
60 HP Johnson/70 HP Evinrude
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: New Parts
Just bought a new prop. New Trim/Till Gauge. New Roller for Carbs. Plus some other miscellaneous parts.
Product Fitment Grid
This guide is to be used as a reference only. You must verify fitment using your model or serial number.
Customers Also purchased
Supersession Chain
| Name | SKU | Superceding SKU |
|---|---|---|
| Trim Gauge Kit Assembly VIEWING THIS PRODUCT | 0767210 | CURRENT |
| TRIM GAUGE ASSEMBLY | 0174679 | 0767210 |
| Trim/Tilt Gauge (Tech Series) | 0174490 | 0174679 |
| Trim Gauge Assembly | 0583653 | 0174679 |
| Gauge & Cable Assembly | 0583206 | 0583653 |
| Gauge & Cable Assembly | 0583208 | 0583653 |