Pivot shaft Keeper 0327696
This product will be cross shipped from one of our secondary warehouses. Please note the additional handling time.
Last update: 107 days ago Update Now View Secondary Warehouses
|In Stock||Unavailable||In Stock||In Stock|
This product is not being produced anymore however may still be available through other dealers.
Last search: 107 days ago Update Now
No searched locations carry this part.
- This is an OEM part manufactured by Johnson/Evinrude, OMC
- Flat rate shipping starting at $3.95
- 30 day return policy
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
Johnson 65 Commercial
- Repair Difficulty
- Repair Time
- More than 4 hours
Problem fixed: maintenance. sparkplugs, fuel filters, thermostats, gearbox oil change
Most dificult were the thermostat replacement, due to the plastic thermostat covers. You may find them frozen with electrolysis. When removal they may break very easely and in order to remove them, be very careful. If by any chance the plastic top of the nut breaks use the smallest chisel you can find to break the plastic thread from outside to the center. Do not drilled, it may cause damage to the inner thread of the cylinder heads. (By this time you may be thinking why this caveman is not using proper tools like for example; an extractor, well you know what kind of damage electrolysis can cause to metal such as aluminum, keep trying and compromise the cylinder heads, good luck) Also try not to loose any small plastic particles while breaking the residual plastic thread, they may fall into the cylinder heads and it could cause blockage to the cooling system. After a complete removal, clean the threads well and use antiseage with aluminum for future easy removal.