Swivel Bushing 23-932481
This product is not being produced anymore however may still be available through other dealers.
Last search: 266 days ago Update Now
No searched locations carry this part.

- Guaranteed fitment for 48 different models
- This is an OEM part manufactured by Mercury Marine
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Questions
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
100 Product Reviews
1980 mercury 80 hp outboard 2 stroke
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Would not shift
The black bushing on the shifting rod broke and the rod came out. It was a tough trying to get the rod back in. Tight space.
Merc 115 Two stroke
Mercury 0
Mercury 90hp
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
Problem fixed: Bogging
Rebuilt fuel pump and replaced throttle rod keepers
2004 Merc 60 HP efi
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Mariner
Mercury 50hp
Mercury 75
50 4 stroke mercury
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Throttle linkage swivel keep coming off
Took 15 minutes to replace
90hp Mercury 2001
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: No power on throttle up
Link pin popped off . Replaced both clips and pin
Mariner 6hp two stroke
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: 1 Piston had wear
Did the job myself
Mercury 90HP
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: none
Throttle cam lever was just worn
Mariner Outboard 75 [ELHPTO] - 7075411YD
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: engine died.
Linkage broke causing engine to fluctuate and barely run. Works now but its time to rebuild the carburetors. Ethanol gas and water comes hand in hand.
2006 Honda 40
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Idle problems, throttle problems, shifting stall
After a five minute diagnosis of an ongoing problem we discovered a broken piece on the throttle pivot assembly. I couldn’t find it locally by P/N but a quick google search took me to Crowley. It was in stock, I paid the rush freight charge and had my boat back up and running.
MERCURY 150 4 STROKE
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Throttle rod slips out of bushing, stuck at idle speed.
Simple replace, no special tools. Frankly Mercury should redesign it with a cotter pin so it can't just pop out.
Mercury 90 hp salt water
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: boat went from 30 mph to 2 mph in a heart beat
the 2 bushing that hold the throttle rod linkage broke .
mercury 60 hp
Mercury 90hp
- Repair Difficulty
- Easy
- Repair Time
- 2 to 4 hours
Problem fixed: Engine sat up for 10+ years
Rebuilt carburetors and fuel pump, changed water pump and fuel filter, cleaned out fuel tank and changed the 2-cycle oil.
Mercury 90 hp
90 hp Mercury
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Throttle linkage worn out.
Easy fix parts were what i needed.
Mercury 125
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Engine would not rev only idle
The swivel bushing for the throttle linkage broke. Popped the old one and and the new one right back in. Easy fix.
Mercury 40 HP EFI
Mercury 50hp
- Repair Difficulty
- Medium
- Repair Time
- 2 to 4 hours
Problem fixed: Scored cylinder
I had to replace the power head on my Mercury 50hp. After swapping the components the motor started and ran as expected.
115 Merc elpto
Mercury 90 HP outboard
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Swivel clips broke on throttle link
Replaced both throttle link swivel clips. Installed link in clips. Very easy repair for someone who has no experience working on outboard engines.
Mercury optimax 200hp
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: TPS broke
Just removed 3 screws and unplugged electrical and installed new tps (throttle position sensor) had to adjust the tps once after installation to get correct RPM
mercury 75 hp
2004 Mercury 115 H.P. 2 stroke
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Engine would go into gear, but there was no throttle
On vacation, and 6 miles from the boat launch. Start motor and engage the throttle. We could tell the engine was going into gear, but throttle handle was not moving the throttle on the engine. Made it back using a 9.9 kicker motor at 6 m.p.h.. Brought the boat back to a marine shop in the area, and after some searching they detected the problem. Researched the part online, and found it at Crowley Marine for the best price.
2003 mercury 90 hp
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: engine would idle but not throttle up .
This repair was a normal repair to mercury outboards. The throttle linkage bushings are notorious for breaking allowing the linkage rod to come loose.
60 hp mercury
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
115 mercury 2 stroke
- Repair Difficulty
- Professional
- Repair Time
- 30 to 60 mins
Problem fixed: Throttle linkage loose
Install new clips on throttle linkage,reset throttle adjustments, and and check carbstory throttle plate adjustments, for that the carbs were not set even,realign the carbs so that all throttle plates were the same , runs great now
Mercury 75 2 stroke
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Replaced bushing and throttle rod.
Removed and replaced throttle rod bushings and installed throttle rod by snapping rod in to bushings.
mercury 250xs racing
- Repair Difficulty
- Easy
- Repair Time
- More than 4 hours
Mercury 40
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Throttle Linkage needed haywire to keep it together.
Bought used motor. Listened to lying salesman with BIG smile say there were backordered parts, but nooo problem. Took delivery several days later. Fixed the problem leaning of the back of the boat several times before using haywire fix. Spent way tooo looong finding parts diagram. Ordered parts from Crowley. Did not believe parcel delivery from Denver could take as long as stated on your website. Discovered that the parcel eventualy arrived from Sweden! Installed the new parts in minutes.
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Linkage to carburetors came undone
Replaced plastic bushings/clips
Product Fitment Grid
This guide is to be used as a reference only. You must verify fitment using your model or serial number.
BRAND | MODEL | 1987 | 1988 | 1989 | 1990 | 1991 |
---|---|---|---|---|---|---|
Mariner Outboard | 75 [ELHPTO] | - | - | x | - | - |
Mariner Outboard | 75 [ELH] | - | - | x | - | - |
Mariner Outboard | 75 [ELO] | x | x | x | - | - |
Mariner Outboard | 75 [ELPTO] | x | x | x | - | - |
Mariner Outboard | 90 [ELO] | x | x | - | - | - |
Mariner Outboard | 90 [ELPTO] | x | x | x | - | - |
Mariner Outboard | 135 [L] | - | - | - | x | x |
Mariner Outboard | 150 [CXL] | - | - | - | x | x |
Mariner Outboard | 150 [L] | - | - | - | x | x |
Mariner Outboard | 150 [XL] | - | - | - | x | x |
Mariner Outboard | 150MG2 [ELPTO] | - | - | - | x | x |
Mariner Outboard | 175 [L] | - | - | - | x | x |
Mariner Outboard | 175 [XL] | - | - | - | x | x |
Mariner Outboard | 175MG [L] | - | - | - | - | x |
Mariner Outboard | 175SKI [L] | - | - | x | x | - |
Mariner Outboard | 200 [CXL] | - | - | - | - | x |
Mariner Outboard | 200 [L] | - | - | - | - | x |
Mariner Outboard | 200 [XL] | - | - | - | - | x |
Mariner Outboard | 220XRI [L] | x | x | - | - | - |
Mariner Outboard | 220XRI [XL] | x | x | - | - | - |
Mercury Outboard | 70 [ELHPTO] | - | x | - | - | - |
Mercury Outboard | 70 [ELO] | x | x | x | - | - |
Mercury Outboard | 70 [ELPTO] | x | x | x | - | - |
Mercury Outboard | 75 [ELHPTO] | - | - | - | x | - |
Mercury Outboard | 75 [ELO] | - | - | - | x | - |
Mercury Outboard | 75 [ELPTO] | - | - | - | x | - |
Mercury Outboard | 80 [ELO] | x | x | x | - | - |
Mercury Outboard | 80 [ELPTO] | x | x | x | - | - |
Mercury Outboard | 90 [ELO] | x | x | - | - | - |
Mercury Outboard | 90 [ELPTO] | x | x | x | x | - |
Mercury Outboard | 90 [EL] | - | - | - | x | - |
Mercury Outboard | 135 [CXL] | - | - | - | x | x |
Mercury Outboard | 135 [L] | - | - | - | x | x |
Mercury Outboard | 135 [XL] | - | - | - | x | x |
Mercury Outboard | 150 [CXL] | - | - | - | x | x |
Mercury Outboard | 150 [L] | - | - | - | x | x |
Mercury Outboard | 150 [XL] | - | - | - | x | x |
Mercury Outboard | 150XR4 [ELPTO] | - | - | - | x | x |
Mercury Outboard | 175 [L] | - | - | - | x | x |
Mercury Outboard | 175 [XL] | - | - | - | x | x |
Mercury Outboard | 175XRI [L] | - | - | - | - | x |
Mercury Outboard | 200 [CXL] | - | - | - | - | x |
Mercury Outboard | 200 [L] | - | - | - | - | x |
Mercury Outboard | 200 [XL] | - | - | - | - | x |
Mercury Outboard | 200XRI | - | - | x | - | - |
Mercury Outboard | 200XRI [ELPTO] | - | - | x | x | x |
Mercury Outboard | 220XRI [ELPTO] | x | x | - | - | - |
Mercury Outboard | 220XRI [EXLPTO] | x | x | - | - | - |
Customers Also purchased
Base
Carburetor Gasket Set
Carburetor Repair Kit
High Tension Igition Cable
ROD-THTL CONTROL
Swivel Ball, one piece shift shaft
Throttle Cam Assembly
Throttle Control Link
Supersession Chain
Name | SKU | Superceding SKU |
---|---|---|
Swivel Bushing VIEWING THIS PRODUCT | 932481 | CURRENT |
Swivel Bushing | 93248 | 932481 |