Inlet Needle F10265
- Guaranteed fitment for 20 different models
- This is an OEM part manufactured by Mercury Marine
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Description
Product Questions
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
37 Product Reviews
Mercury force 75hp
- Repair Difficulty
- Medium
- Repair Time
- 30 to 60 mins
Problem fixed: Float sticks
Cleaned and rebuilt the carburetor. The carburetor rebuild kit is no longer available but I was able to buy all the individual parts needed through Crowley marine.
Force 75hp
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
Problem fixed: Carb rebuild
Just dissassemble the thing and reassemble with new parts. Clean very well (check youtube)
Force 50
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: carb rebuild
Everything came as orderd, on time, work well. I hope I don`t have to use them again LOL! But if I do, This is the company I`m callin!
Force
Tracker 40 hp
- Repair Difficulty
- Medium
- Repair Time
- 2 to 4 hours
Problem fixed: Would not start
Rebuilt the carb. Had a hole in float bowl. Replaced that, all gaskets, jet, and nozzle. Running great.
Force 120 HP Outboard
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Gas pouring out of carburetor.
Rebuilt carburetor. Inlet pin was getting stuck.
1998 90hp tracker
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Rebuild carburetor
Easy fix , good parts
Mercury Sportjet 90
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: No fire
bolt off, bolt on. Super easy.
Mercury 40hp
1991 Force 50 hp
Sport jet 120
- Repair Difficulty
- Hard
- Repair Time
- 2 to 4 hours
Problem fixed: No start
Rebuilt motor which had starting issues so did carb rebuild and enrichment solenoid.
Merc/ Force 75hp
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Old
Just needed a new carb float and pin
Product Fitment Grid
This guide is to be used as a reference only. You must verify fitment using your model or serial number.
BRAND | MODEL | 1989 | 1990 | 1991 | 1992 | 1993 | 1994 | 1995 |
---|---|---|---|---|---|---|---|---|
Outboard | 120 | - | x | x | x | x | x | - |
Outboard | 120LD | - | x | - | - | - | - | - |
Outboard | 125 | x | - | - | - | - | - | - |
Outboard | 125LD | x | - | - | - | - | - | - |
Outboard | 150 | x | x | x | x | x | x | - |
Outboard | 35 | x | x | x | - | - | - | - |
Outboard | 40 | - | - | - | x | x | x | x |
Outboard | 50 | x | x | x | x | x | x | x |
Outboard | 85 | x | - | - | - | - | - | - |
Outboard | 85LD | x | - | - | - | - | - | - |
Outboard | 90 | - | x | x | x | x | x | x |
Outboard | 90LD | - | x | - | - | - | - | - |
Sport Jet | 90 | - | - | - | - | x | - | - |
Sport Jet | 90 (JET DRIVE) 1993 | - | - | - | - | x | - | - |
Sport Jet | 90 (JET DRIVE) 1994 | - | - | - | - | - | x | - |
Sport Jet | 90 (POWERHEAD - NON OIL INJECTION) 1993 | - | - | - | - | x | - | - |
Sport Jet | 90 (POWERHEAD - NON OIL INJECTION) 1994 | - | - | - | - | - | x | - |
Sport Jet | 90 (POWERHEAD - OIL INJECTION) 1994 | - | - | - | - | - | x | - |
Sport Jet | 90 [JETPUMP] | - | - | - | - | x | x | - |
Sport Jet | 90 [JETPWHD] | - | - | - | - | - | x | x |
Customers Also purchased

Carburetor Gasket Set
FK10023
FLOAT KIT
891730A01
Fuel Pump Diaphragm Kit
857005A1
Idle Mixture Screw
F10268
Nozzle
FO16133
Primer Bulb
F681046
SP #L76V
896329827
Tube
FO16993Supersession Chain
Name | SKU | Superceding SKU |
---|---|---|
Inlet Needle VIEWING THIS PRODUCT | F10265 | CURRENT |
Inlet Needle | FK10264 | F10265 |
Needle and Seat | FK10309 | F10265 |
Needle | FO18017 | F10265 |
Inlet Needle and Seat | F10264 | FK10264 |