Manifold O-Ring Kit Trim / Tilt O-ring Kit-Outboard 0393942
This product is not being produced anymore however may still be available through other dealers.
Last search: 5 days ago Update Now
No searched locations carry this part.

- This is an OEM part manufactured by Johnson/Evinrude, OMC
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Description
Kits include all o-rings required for service of the hydraulicassembly. (Does not include tilt cylinder o-rings)
Product Questions
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
27 Product Reviews
johnson 140 1982
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: leaking trim/tilt
with aid of online forums, i was able to pick the correct package of orings. online videos made it easy, as there are always tips and tricks. i made my own tool to remove the trim caps. thanks !!!
johnson 88hp
- Repair Difficulty
- Medium
- Repair Time
- 2 to 4 hours
Problem fixed: tilt and trim not working
removed tilt and trim unit, disassembled every piece and resealed, cleaned all valves, flushed out trash and other debris and reassembled with new seals. reinstalled on boat. tested. worked.
Evinrude 75hp
Evenrude
- Repair Difficulty
- lProfessional
- Repair Time
- 30 to 60 mins
Problem fixed: Tilt and trim rebuild
Had to support the outboard and remove tilt bolt from outboard. Lower tilt and trim to remove trim caps and trim assembly. Install new seals in tilt put all together and install back into the housing. Tighten trim caps and refill with fluids
Johnson 110 hp
- Repair Difficulty
- Hard
- Repair Time
- More than 4 hours
Problem fixed: Power trim wouldn't move
Completely rebuilt the power trim /tilt. Bought a complete seal kit. Replaced all o-rings, and seal. Took a while to bleed the hydraulic system , but it works great now.. Thanks.
Johnson 115 hp V4
- Repair Difficulty
- Hard
- Repair Time
- 1 to 2 hours
Problem fixed: Trim lift mechanism stopped working and all bolts and caps were frozen in place.
Lift cylinder was easy to disassemble and repair, but the bolts holding the lift/tilt mechanism broke off in the cylinder housing and necessitated additional work to the tilt/trim frame. Once we were able to remove this assembly then we could tackle the trim cylinders. The top caps that needed a spanner wrench (that we didn't have and had to fabricate one from an old wrench and some drift pins) were frozen in place and very hard to spin off. This took the majority of the repair time. Reassembly and installation and bleeding were easy (once we found the correct information on the WEB).
60 hp evinrude
Customers Also purchased
FCG*FOGGING OIL 12
O-Ring Package
O-Ring Package
Retainer & Bearing Assembly
Trim Cylinder Quad Ring
Trim Rod Seal
Trim Rod Wiper
Water Pump Repair Kit (Includes Impeller Housing)
Aftermarket Product Interchange
Name | SKU | Price | Brand |
---|---|---|---|
Trim Seal Kit | 18-2585 | $39.51 | Sierra Marine |