Crowley Marine: serving boaters for over 40 years Crowley Marine: serving boaters for over 40 years
Parts in stock Most parts in stock Same day fulfillment
$3.95 shipping on all orders*
Low Price Guarantee
9.6 Pilot logo
0My cart
Cart is empty

Impeller Housing to Plate Seal 0331353

Satisfaction rating 5 out of 5 (16 Ratings)
$9.99
Save $0.50 (5%)
5+ IN STOCK Ships Immediately

View Secondary Warehouses

  • This is an OEM part manufactured by Johnson/Evinrude, OMC
  • Flat rate shipping starting at $3.95
  • 30 day return policy

Product Description

Bombardier factory part. Search for more factory parts & parts diagrams.

Product Questions

There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.

Great. Easy to follow the part chart and get the right one. Price was very good too. Shipped and delivered on time.
by

I highly recommend Crowley Marine for factory correct parts and prompt service.
by

Highly recommend and will shop again.
by

Johnson 150 HP 1993

Repair Difficulty
Medium
Repair Time
1 to 2 hours
Fantastic web site and delivery times to New Zealand
by

Problem fixed: Shift lever seals and impeller needed replacement

Best tip I received from another site was to use a ratchet strop to hold bottom leg as I eased it off the engine and also when I had to reposition it with exhaust, water drive shaft and shift.

Evinrude Ficht 225HP (2001)

Repair Difficulty
Medium
Repair Time
1 to 2 hours
Great service. Long backorder time on one item, but professionally handled by support staf.
by

Problem fixed: Traces of water in gearbox

Propeller seals were replaces last season, so main suspect was driveshaft seal and/or shift rod o-ring. Suspicion confirmed after removal of water pump: traces of oil found around driveshaft seal. 1) Removal of lower unit (requires to remove lower cowling) 2) Removal of water pump (4 screws) 3) Removal of shift rod cover (6 screws) 4) Removal of driveshaft bearing (4 screws). Bearing removed by gently prying with flatheaded screwdriver Replacement of: * 2 driveshaft seals (upper + lower). Old ones gently chisseled out with screwdriver. New ones installed with suitable size socket-wrench socket and hammer. * shift rod cover o-ring * driveshaft bearing o-ring * waterpump gasket * shift rod cover gasket Reinstalled everyting in reverse order of removal. Note: It is important to adjust the shift rod height (see manual)

Great service and fast shipping
by

Johnson 115 hp Fast strike model 1995

Repair Difficulty
Medium
Repair Time
1 to 2 hours
Perfect ,no problems
by

Problem fixed: replacing waterpump and shift rod o rings

To remove the tail section I disconnected the fuel pump because to access the tiny screw at the undersize of the engine is a bit a pain in the ass ,to loosen the shifter .There is almost no space to get an easy access All the other bolts came loose easy. Disconneted all the bolts fromthe waterpump and the shifter cover .The 2 o rings on the shifter were torn and they sticked to the shifter rod so it was hard to get in gear.Replaced pump and all the rubbers and gaskets .Did some extra grease after cleaning the gasket space and also did some extra on the bolts.I maked sure that the distance of the shifter top to bottom was the same as when I turned it loose .Then replaced the tail to the motor and connected the fuel pump and the rubber lines .All worked fine again and getting in gear was very smoothly now.

Excellent service, thanks!
by

Johnson 90 horse power

Excellent. Wade did an outstanding job of finding all the parts and the correct numbers. Will definitely shop with you in the future.
by

evinrude 50hp

Repair Difficulty
Medium
Repair Time
1 to 2 hours
customer service was great helped with question i had will be ordering again
by

Problem fixed: heating problem and lower unit leak

replace water pump assy and reseal lower unit

Evenrude

I got all the parts quickly and they fit perfectly on my motor.
by

Evinrude Ficht 175 hp

Repair Difficulty
Professional
Repair Time
More than 4 hours
Quick turn around from shopping cart to my front door. I'm impressed !
by

Problem fixed: used engine

Purchased twenty year old Bass boat w/ low hrs. (115) on engine. Bought gear case seal kit , impeller and a new water pick up screen from CM and dropped parts along with lower unit off at my mechanic. 8 days from the time I hit the "buy" button till I picked up my lower unit from my Mechanic ! Beat that NASCAR !

by

91 150 EVINRUDE

GREAT EXPERIENCE , WILL SHOP AND BUY THERE AGAIN .
by

by

jonson 90 hp

La esperiencia es positiba el catalogo es facil y bien ilustrado.
by

Customers Also purchased

Aftermarket Product Interchange

Name SKU Price Brand
O-Ring 18-7963 $8.12 Sierra Marine
Plate Seal (Min. Qty 5) 86660 $6.56 GLM Marine
O-Ring 9-48217 $6.29 Mallory Marine

Flat $3.95 Shipping on ALL parts orders

We offer shipping flat $3.95 shipping on ALL parts orders. (Complete Engines, Lower Units and Sterndrives excluded). In addition orders over $89 have reduced cost express shipping available in checkout.

shipping map shipping map legend

You can get a rough idea of standard transit times from the map above.