COVID-19 UPDATE: How Crowley Marine is preparing & responding. Read more...
Crowley Marine: serving boaters for over 50 years Crowley Marine: serving boaters for over 50 years
Parts in stock Most parts in stock Same day fulfillment
$3.95 shipping on all orders*
Low Price Guarantee
9.6 Pilot logo
0My cart

Select Your Engine:

Impeller Impeller Kit 0386084

Satisfaction rating 5 out of 5 (52 Ratings)
$16.95
Save $3.34 (17%)
5 in stock Ships Immediately

Last update: 2 days ago Update Now

  • This is an OEM part manufactured by Johnson/Evinrude, OMC
  • Flat rate shipping starting at $3.95
  • 30 day return policy

Product Description

Bombardier factory part. Search for more factory parts & parts diagrams.

Product Questions

There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.

52 Product Reviews

by

Johnson 15hp

Repair Difficulty
Medium
Repair Time
Less than 30 mins
The right parts shipped pretty quick. Thanks!
by

Problem fixed: Pull start recoil spring.

Don't try to preload the spring when installing. Plenty of room to load it with the rope after.

77j15m

Repair Difficulty
Medium
Repair Time
30 to 60 mins
Good parts were spot on
by

Problem fixed: Not used for 8yr

Pulled lower unit make sure it is in gear. Disconnect shift linkage. Drop lower unit make sure to keep shaft in place..remove the four bolts from water pump housing.. slowly lift housing taking care to not lose the ground key stock pin. It will be in the impeller or on the shaft. Remove old impeller. Cleanup all surface. Apply a very light layer of OEM lowering grease to a mating surfaces. Put a dab on the shaft key and key way stock to hold it in place a u slide housing onto shaft. Tighten bolts Replace out put grommet and shaft o rings and align output tube with grommet. As you put lower unit into place reconnect linkage. While applying upward pressure make sure the shft is aligned the lower unit will snap up to t2 bolts in to hold in place then push up while wiggling and put into neutral. the lower unit should snap onto place... bolt up and change lower unit gear oil.. making sure the sealing washers are good if in doubt replace. Recomend to tank test rather than clappers.. run up to temp making sure the telltale hole is spoutting water.

Johnson 9.9

by

by

The products were delivered as ordered and in a quick manner...excellent service.
by

1974 Johnson 9.9

Repair Difficulty
Medium
Repair Time
2 to 4 hours
Have a 1975 Johnson 9.9 that hasn’t been started for 3 years. Needed to rebuild carburetor and replace water pump. Got near instant response by e mail confirming the part numbers I wanted were the correct ones, ordered around 4 pm and parts arrived in Toronto in less than 24 hours! Awesome! BTW, my little 9.9 runs like a charm again. Thnx!
by

Problem fixed: Would not run more than 10 seconds/ no cooling water

Rebuilt water pump first, rebuilt carburetor next. It took a little ingenuity to get the carb mounted again. The one mounting stud is pretty hard to get to. All put back together and she started on the sixth pull, after being stored for three full years. Made me feel like I might be able to fix a rainy day. (You got a parts kit for that?)

This was my second time ordering parts from Crowley for a different boat motor I had , They again had every thing I needed and at the best pricing I could find ,and my parts showed up sooner than expected. Thanks again Crowley Marine.
by

by

johnson 15

good guys very nice, excuse my english language
by

by

by

I get my stuff fast with these guys!
by

I ordered carb and fuel pump kits. The ordering system works great. The order was shipped quickly and arrived much sooner than expected. The system kept me informed of the status of my shipment. The parts were exactly as ordered. Crowley Marine will be my first stop when looking for outboard parts.
by

by

by

by

1985 Johnson 15 HP

Repair Difficulty
Easy
Repair Time
30 to 60 mins
Very Good
by

Problem fixed: No water was coming out of the engines cooling line,

I looked up on U-Tube on how to repair and replace the impeller, then I ordered the Impeller. When the part came in I took the lower end off and realized while replacing the Impeller, that the rubber tube (Grommet) that connected the two units water line together was torn as well. So I had to order that and wait. Once that came in, it was a quick job, other than putting the screw back into the Shifting Rod. That was left out of all the U-Tube Videos. I slipped it in-between the two casings and let it sit the crack between the two units, then l pushed the units together until the grove in the Shifting Rod was in place. Then pick up the screw from the crack with needle nose pliers and placed it in the hole, then screwing it in with a screw driver and then pushed the two units together. While I was pushing the two unit back together I also made sure and watched the New Rubber Grommet go into the Water Tube. The only thing I would have done differently was maybe order the whole re-builded kit and replace everything for like $25-30 more. My lower unit it exceptionally clean. No mud in it or salt water use. Looks like new still inside. It was my fathers since new and now I have the pleasure of owning it. At Crowley I also ordered a Slow Speed Adjustment Knob. I never thought I would ever find one on a 1985 model but as I was looking at the parts list I saw it and ordered one. I don't know how long the other one was missing but it's been many years. Now everything is working fine. Good light for looking inside will be a great help to you when you are putting it back together, Thanks Crowley

great
by

Everueda 15ph.

SUPER!
by

by

Very good no questions asked 5 stars.
by

johnson outboard 9.9

by

Johnson 15 hp

Great experience
by

by

15 hp Evinrude

Repair Difficulty
Easy
Repair Time
30 to 60 mins
Fast service and delivery
by

Problem fixed: Water pump

Had to take foot off to replace water pump

Evinrude 15 hp

Repair Difficulty
Easy
Repair Time
30 to 60 mins
Excellent. Thanks guys.
by

Problem fixed: Not pumping water

Dropped bottom end and removed old water impeller and replaced it with new one. Greased as directed and replaced bottom end. Easy and quick.

Smooth and simple transaction. No complaints.
by

by

Great
by

Johnson 9.9 hp

Repair Difficulty
Easy
Repair Time
Less than 30 mins
Fast and easy to locate and order the right parts first time.
by

Problem fixed: Not pumping water

Pulled lower unit and replaced impeller.

Good parts diagrams and pics got what I needed
by

J10ELCTC Johson

by

15 Evinrude

Repair Difficulty
Medium
Repair Time
1 to 2 hours
Even better than usual......ordered a part on a Friday, it was shipped on Friday, and I received the right part on Monday.........from Denver to Juneau, AK......it can't get much better than that..........thanks to all of the Crowley Marine folks...........
by

Problem fixed: poor water pumping

Replaced the impeller in the water pump.

Johnson 15hp

Very helpfull, prompt delivery
by

by

Johnson 15 hp

Repair Difficulty
Medium
Repair Time
30 to 60 mins
Excellent. Factory parts diagrams made the order easy.
by

Problem fixed: Water pump impeller

Remove bolts holding lower unit housing. Housing will drop slightly, exposing the shift rod holding clamp. Fully remove the bolt and the complete housing will drop down. Remove bolts from impeller housing and lift off cover. Slide off old impeller, be careful not to lose the key pin. Support the housing, so the lower unit oil won't drain off. Sand paper the housing surface to smooth up and apply a thin film of oil to aid in sliding the impeller in. The impeller is a tight fit and will try to pop out. Start one side and work around to get the fins to all slide in. Slide on shaft, do not forget the drive pin. It lays in a flat milled section on the shaft to engage the impeller. Reinstall impeller housing bolts. Slide housing shaft back up and engage into the splines. You can rotate the prop to help line up. The shift rod will slide into the coupling. Reinstall the collar bolt. There is a milled half slot in the shaft to allow the bolt to slide in. Tighten the bolt on the collar. Finish sliding the housing back to the upper unit and reinstall the bolts.Be careful not to over torque the bolts, the housing is cast and over tightening can crack the housing. Water test to make sure the impeller is working properly.

I had no problem getting my parts
by

1988 johnson 15hp.

perfect!!!
by

by

Johnson 15hp

Crowley marine was great. Good prices and products arrived on time.
by

1979 Johnson 15hp

Repair Difficulty
Medium
Repair Time
Less than 30 mins
by

Problem fixed: Fuel not pumping

Had to rebuild the fuel pump. Worked very well afterward.

Quick delivery and also helped find a back ordered part from another vendor. Very helpful. I will continue to buy all my parts here.
by

by

1982 Evinrude 15 HP

Repair Difficulty
Medium
Repair Time
1 to 2 hours
by

Problem fixed: Overheating

The motor was overheating. Replaced the water pump impeller and it was still over heating. Replaced the thermostat and that fixed the problem. Thanks for the fast shipping of parts.

Excellent,thank you.
by

Great. Couple parts turned out to be nla but I got most of what I need.
by

15 HP Evinrude

I wish I'd known ahead of time that I would have to pay $19.00 duty on a $80 dollar bill when purolator showed up at the door. I'd prefer dealing with USPS instead of a courier.
by

Repair Difficulty
Easy
Repair Time
Less than 30 mins
It was easy to find the model year from the serial number.
by

Johnson 9.9

Got exactly what I was looking for
by

Evinrude 6hp

by

by

Customers Also purchased

Aftermarket Product Interchange

Name SKU Price Brand
Impeller 18-3050 $15.64 Sierra Marine
Impeller 9-45201 $14.99 Mallory Marine