Due to a temporary system outage at the BRP warehouses, Evinrude, Johnson, and OMC products that are not in stock will ship with additional delays. We apologize for any inconvenience.
Yamaha, Suzuki, Mercury and Mercruiser products will continue to ship without interruption.
Contact Us
My Account
Search Over 1 Million OEM Parts
Most parts in stock- Same day fulfillment

Select your engine to find guaranteed-fit parts:

Impeller Housing Plate Gasket 0338484

Satisfaction rating 5 out of 5 (46 Ratings)
$3.95
You save $0.61. (13%) $4.56
ONLY 1 REMAINING
Ships Immediately
Evinrude & Johnson logo
  • Guaranteed fitment for 61 different models
  • This is an OEM part manufactured by Evinrude & Johnson, OMC
  • Flat rate shipping starting at $4.95
  • 30 day return policy

Product Description

Bombardier factory part. Search for more factory parts & parts diagrams.

This product is mentioned in 1 document:

Product Questions

There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.

46 Product Reviews

by

by

Easy
by

by

by

by

by

by

Great! Fast Shipping and on time.
by

Johnson 150

Repair Difficulty
Medium
Repair Time
1 to 2 hours
Got what I needed in a timely manner.
by

Problem fixed: Water in gearcase.

Replaced driveshaft seal.

E-tech 90

by

Always good never no problems
by

150 Johnson

Repair Difficulty
Easy
Repair Time
1 to 2 hours
by

Problem fixed: Lower unit repair

I have not completed repairs but once I do I will send you a report

Evinrude etec 90

Repair Difficulty
lProfessional
Repair Time
2 to 4 hours
Hi Crowley Marine Team , everything was super easy . Shipping to Germany ( Europe) without any Problems .
by

by

115

They sent the wrong parts .. I used there part lists but when the parts came they were wrong… I got a thermostat when I ordered a bearing
by

by

by

150 evinrude water pump gasket

correct part quick shipping
by

by

All parts were in stock and I received them in a well packed box in a timely manner.
by

Johnson 90, 115 hp

by

Merchandise was goo quality. Arrived packaged nicely.
by

good
by

Had. To wait a bit because of Covid related delays, otherwise service was perfectly executed.
by

evinrude 200 hp ficht ram

Repair Difficulty
Easy
Repair Time
2 to 4 hours
Bonne communication et envoi rapide. J'achèterais de nouveau chez vous.
by

by

Johnson 115 hp 2 stroke

by

Etec 115 HO

Always great service and quick.
by

Highly recommend and will shop again.
by

Johnson 150 HP 1993

Repair Difficulty
Medium
Repair Time
1 to 2 hours
Fantastic web site and delivery times to New Zealand
by

Problem fixed: Shift lever seals and impeller needed replacement

Best tip I received from another site was to use a ratchet strop to hold bottom leg as I eased it off the engine and also when I had to reposition it with exhaust, water drive shaft and shift.

Evinrude Ficht 225HP (2001)

Repair Difficulty
Medium
Repair Time
1 to 2 hours
Great service. Long backorder time on one item, but professionally handled by support staf.
by

Problem fixed: Traces of water in gearbox

Propeller seals were replaces last season, so main suspect was driveshaft seal and/or shift rod o-ring. Suspicion confirmed after removal of water pump: traces of oil found around driveshaft seal. 1) Removal of lower unit (requires to remove lower cowling) 2) Removal of water pump (4 screws) 3) Removal of shift rod cover (6 screws) 4) Removal of driveshaft bearing (4 screws). Bearing removed by gently prying with flatheaded screwdriver Replacement of: * 2 driveshaft seals (upper + lower). Old ones gently chisseled out with screwdriver. New ones installed with suitable size socket-wrench socket and hammer. * shift rod cover o-ring * driveshaft bearing o-ring * waterpump gasket * shift rod cover gasket Reinstalled everyting in reverse order of removal. Note: It is important to adjust the shift rod height (see manual)

383 stroker in a 1979 vip 70 milesper hour

fast and painless
by

Johnson 115 hp Fast strike model 1995

Repair Difficulty
Medium
Repair Time
1 to 2 hours
Perfect ,no problems
by

Problem fixed: replacing waterpump and shift rod o rings

To remove the tail section I disconnected the fuel pump because to access the tiny screw at the undersize of the engine is a bit a pain in the ass ,to loosen the shifter .There is almost no space to get an easy access All the other bolts came loose easy. Disconneted all the bolts fromthe waterpump and the shifter cover .The 2 o rings on the shifter were torn and they sticked to the shifter rod so it was hard to get in gear.Replaced pump and all the rubbers and gaskets .Did some extra grease after cleaning the gasket space and also did some extra on the bolts.I maked sure that the distance of the shifter top to bottom was the same as when I turned it loose .Then replaced the tail to the motor and connected the fuel pump and the rubber lines .All worked fine again and getting in gear was very smoothly now.

96 Johnson 115

Repair Difficulty
Easy
Repair Time
1 to 2 hours
Everything I have ordered for both of my boats was delivered on time. For me their selection is great! The online process is easy to comprehend as far as diagrams per motor and categories. I contacted them personally today and received immediate help. Thanks for being courteous!!
by

Problem fixed: Replaced water pump ,exhaust gaskets , inlet screen and anodes

Started with water pump but found problem with exhaust volute gaskets once inside lower unit. Replaced inlet screen and anode due to deterioration.

Johnson 90 horse power

Excellent. Wade did an outstanding job of finding all the parts and the correct numbers. Will definitely shop with you in the future.
by

by

by

by

by

Evinrude 140 lower unit.

Repair Difficulty
Hard
Repair Time
1 to 2 hours
Fast and easy.
by

Problem fixed: Purchased over the internet and just thought it should be done.

Prop shaft housing was really hard to pull out. Other than that went pretty well

Very good experience. There online inventory is very accurate and they ship items out fast.
by

91 150 EVINRUDE

GREAT EXPERIENCE , WILL SHOP AND BUY THERE AGAIN .
by

by

by

jonson 90 hp

La esperiencia es positiba el catalogo es facil y bien ilustrado.
by

Product Fitment Grid

This guide is to be used as a reference only. You must verify fitment using your model or serial number.

Customers Also purchased

Supersession Chain

Name SKU Superceding SKU
Impeller Housing Plate Gasket VIEWING THIS PRODUCT 0338484 CURRENT
Water Pump Gasket 0777844 0338484
Impeller housing plate Gasket 0324701 0338484

Aftermarket Product Interchange

Name SKU Price Brand
Impeller Gasket 18-2557 - Sierra Marine