flat $4.95 shipping
My Account
Order Status
Crowley Marine: serving boaters for over 50 years
Parts in stock Most parts in stock Same day fulfillment
$4.95 shipping on all orders*
Low Price Guarantee
9.6 Pilot logo
0My cart

Select Your Engine:

Johnson/Evinrude, OMC

Indicator Support Gasket 0312193

Satisfaction rating 5 out of 5 (15 Ratings)
$5.95
You save $.04. (1%) $5.99
CROSS SHIP Leaves in 6-8 days
  • This is an OEM part manufactured by Johnson/Evinrude, OMC
  • Flat rate shipping starting at $4.95
  • 30 day return policy

Product Description

Bombardier factory part. Search for more factory parts & parts diagrams.

Product Questions

There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.

15 Product Reviews

All parts were as ordered. Good communication from Crawley throughout the process.
by

Very good
by

by

Johnson 25 hp

Repair Difficulty
Medium
Repair Time
1 to 2 hours
Perfect!!
by

1967 Johnson outboard (6hp) CD-24A

Great help. I'm very happy. Thank you
by

The parts that I ordered were exactly as described on the website. Some parts were back ordered, but still shipped in a few a few days!
by

Have done multiple orders and no problem, will order again
by

Great
by

Evinrude 6gal steel tank

Repair Difficulty
Medium
Repair Time
More than 4 hours
Very good. Good prices, shipping charges and extra fast delivery at standard rates. Happy with experience.
by

Problem fixed: Refurbish steel gas tank

Remove inside rust, sand old paint, reprime, paint several coats of red and clear. Replace float assembly. Used VHT high heat as it was listed as chemical resistant.

by

Johnson 35 hp

Repair Difficulty
Easy
Repair Time
Less than 30 mins
by

Problem fixed: 6 gallon fuel tank leaking fuel at gauge/connector tower area.

Replaced leaking old gaskets on the 6 gallon fuel tank. All gaskets/Parts were correct.

Evinrude 25HP

by

Great!
by

79 Johnson 35hp

Repair Difficulty
Medium
Repair Time
1 to 2 hours
the website was easy to navigate parts were easy to find and everything was in stock. I will always use Crowley for my outboard parts needs.
by

Problem fixed: lower unit popping out of forward gear

I pulled the lower unit. removed the bearing housing with a H type puller and 1/4-20 ready rod, there are two small bolts that hold the housing in. unscrewed the shift rod, there is a large snap ring that must come out behind the bearing housing use large snap ring pliers to get this out, then I removed the prop shaft and replaced the forward gear and clutch dog. I inspected the bearings cleaned and oiled all the parts and reinstalled the prop shaft and snap ring. the shift linkage was the most challenging part but I was able to use a long pick with a 90 degree tip to line up everything. put a new o-ring on the bearing housing and and oiled the o-ring and pushed the housing back in and installed the two small bolts that hold it in. this fixed the popping out of forward gear problem and was not to hard if you have so mechanical ability.

Evinrude Sportwin

Repair Difficulty
Easy
Repair Time
30 to 60 mins
by

Problem fixed: Leaking gas tank

Rebuilt Cruis-a-day fuel tanks.

Customers Also purchased