Rewind starter Pinion 0318940
- This is an OEM part manufactured by Evinrude & Johnson, OMC
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Description
Product Questions
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
50 Product Reviews
Johnson 15hp
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Pull cord gear damaged.
Very easy to replace.
1981 15 hp Evinrude
Evinrude 9.9 hp.
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Replaced worn item.
I watched as my friend removed the old part and I held the starter assembly in place while he replaced the parts.
P
Johnson 14hp
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Starter Pinion Worn
One bolt to remove and replace part. I took a picture of everything before to make sure everything was reassembled correctly.
9.9 Johnson
- Repair Difficulty
- Hard
- Repair Time
- 2 to 4 hours
Problem fixed: broken rewind, choke knob and guide missing, spark plug stripped out of cylinder
Was going to scrap outboard but found parts on Crowley Marine with much appreciation. Got the rewind spring, choke knob. Didn't even think that I could find parts for this old engine. Epoxied and new plug receptor into cylinder with high heat JB weld good for 2400F. Had to make a choke guide and some parts that were lost. Got engine running on first pull now. "Just and old luminum boat with 10 horse Johnson and a reworked choke"
1981 9.9 Evinrude
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: pully start damage
Replace parts and working OK again
Johnson 15 horse
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: The pull rope starter gear
Very easy to fix
Johnson 15hp
- Repair Difficulty
- Medium
- Repair Time
- Less than 30 mins
Problem fixed: Pull start recoil spring.
Don't try to preload the spring when installing. Plenty of room to load it with the rope after.
Evinrude
Johnson 9.9 hp 1990
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: My overly aggressive son pulled the rewind spring out of the cop
Last time I replaced the spring, apparently I put it in backwards. Didn’t know you could, but that’s what a mechanic told me. Read the manual for the proper installation of the spring.
9.9 Evinrude
johnson 9.9
evenrude 5 h. p.
- Repair Difficulty
- Medium
- Repair Time
- 30 to 60 mins
Problem fixed: had to use manual rope starter to get engine started.
had to replace plastic gear that engaged flywheel for recoil starter.
Johnson 9.9 HP
Johnson 15hp 1974
1989 Evinrude 9.9
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
Problem fixed: Recoil for pull start
Thanks to the fast shipping and the professional service repair was easy
1980 Evinrude 15hp
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: starter rebuild
Each year usually in the early spring I service all my small engine's so my grand kids can just take one of the small boats out fishing trouble free as it should be for kids. This year I late to service one motor and needed ready in a hurry. I found Crowley Marine and the rest is history. Thank you Crowley Marine
9.9 Evinrude
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: won't crank
repair starter
Customers Also purchased

Pinion Spring
0318943
Rewind Starter Pulley
0324909
Rewind Starter Spring
0318944
SPRING-REW STRTR
0338534
Starter Spring Retainer
0323654
Washer
0318937
Washer
0318941
Water Pump Repair Kit
0394711Supersession Chain
Name | SKU | Superceding SKU |
---|---|---|
Rewind starter Pinion VIEWING THIS PRODUCT | 0318940 | CURRENT |
Pinion | 0778167 | 0318940 |
Aftermarket Product Interchange
Name | SKU | Price | Brand |
---|---|---|---|
Starter Gear | 18-1505 | - | Sierra Marine |