Magnet Replacment Kit Magnet Replacement Kit 0584304
This product is not being produced anymore however may still be available through other dealers.
Last search: 31 days ago Update Now
No searched locations carry this part.

- This is an OEM part manufactured by Johnson/Evinrude, OMC
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Description
35 amp flywheel 1984 thru (not shippable by air). One magnet per kit.
1 Product Questions
danielle
What are the dimensions of this?
Answer:
The dimensiones are lenght 3 1/2 inches width 3/4.
4 Product Reviews
Evinrude XP 200
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Just noticed broken magnet during trigger replacement
Mixed up epoxy after cleaning flywheel and magnet with sand paper and acetone. Spaced magnet with 7/16” bolts on either side. Applied epoxy to magnet and installed magnet on flywheel making sure beveled corner was facing the right way, (same as the rest). Lightly clamped magnet with c-clamp with very little pressure to flywheel and let set overnight. Reinstalled flywheel and checked ignition timing since trigger had also been replaced. Good to go.
2001 Evinrude 250 HP Ficht
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Stator not charging battery
Removed the flywheel. Removed the stator. Ohm it, no good. Had to cut the flywheel nut off to remove flywheel. Luckily Crowley Marine had a new one.
Customers Also purchased
EPOXY ADHESIVE KIT
Flywheel to crank shaft Key
Grommet
Lower Thermostat Assembly
Nut
O-Ring & Seal Assembly
Sensor Assembly
Spark Linkage Socket
Parts included in this kit
Please note: Some of the included items may not be available for purchase separately and won't be listed here.
Name | SKU | Price | Brand |
---|---|---|---|
EPOXY ADHESIVE KIT | 0431929 | Johnson/Evinrude, OMC | |
Lead Plug Seal | 0514790 | Johnson/Evinrude, OMC |